VINSERTI128 (YMM, YMM, M128, I8)

Summary:	"Insert PackedInteger Values"
Reference:	https://www.felixcloutier.com/x86/vinserti128:vinserti32x4:vinserti64x2:vinserti32x8:vinserti64x4
Extension:	AVX2
Category:	AVX2
ISA-Set:	AVX2
CPL:	3
iform:	VINSERTI128_YMMqq_YMMqq_MEMdq_IMMb
iclass:	VINSERTI128
ASM:	VINSERTI128

Operands

Operand 1 (w): Register (YMM0, YMM1, YMM2, YMM3, YMM4, YMM5, YMM6, YMM7, YMM8, YMM9, YMM10, YMM11, YMM12, YMM13, YMM14, YMM15)
Operand 2 (r): Register (YMM0, YMM1, YMM2, YMM3, YMM4, YMM5, YMM6, YMM7, YMM8, YMM9, YMM10, YMM11, YMM12, YMM13, YMM14, YMM15)
Operand 3 (r): Memory
Operand 4 (r): 8-bit immediate

Available performance data

Arrow Lake-P
Arrow Lake-E
Meteor Lake-P
Meteor Lake-E
Emerald Rapids
Alder Lake-P
Alder Lake-E
Rocket Lake
Tiger Lake
Ice Lake
Cascade Lake
Cannon Lake
Skylake-X
Coffee Lake
Kaby Lake
Skylake
Broadwell
Haswell
AMD Zen 5
AMD Zen 4
AMD Zen 3
AMD Zen 2
AMD Zen+

Arrow Lake-P

Measurements

Latencies
Throughput
- Measured (loop): 0.33
- Measured (unrolled): 0.92
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (6 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*LD+1*UNKNOWN

Arrow Lake-E

Measurements

Latencies
Throughput
- Measured (loop): 0.52
- Measured (unrolled): 0.53
Number of μops
- Executed: 2
- Microcode Sequencer (MS): 0

Meteor Lake-P

Measurements

Latencies
Throughput
- Computed from the port usage: 0.33
- Measured (loop): 0.44
- Measured (unrolled): 0.91 (if an indexed addressing mode is used: 1.00)
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (4 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23A (if an indexed addressing mode is used: 1*p23A)

Meteor Lake-E

Measurements

Latencies
Throughput
- Measured (loop): 0.67
- Measured (unrolled): 0.67
Number of μops
- Executed: 2
- Microcode Sequencer (MS): 0

Emerald Rapids

Measurements

Latencies
Throughput
- Computed from the port usage: 0.33
- Measured (loop): 0.35
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (4 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23A (if an indexed addressing mode is used: 1*p23A)

Alder Lake-P

Measurements

Latencies
Throughput
- Computed from the port usage: 0.33
- Measured (loop): 0.33
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (4 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23A (if an indexed addressing mode is used: 1*p23A)

Alder Lake-E

Measurements

Latencies
Throughput
- Measured (loop): 0.67
- Measured (unrolled): 0.64
Number of μops
- Executed: 2
- Microcode Sequencer (MS): 0

Rocket Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Tiger Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Ice Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Documentation

Throughput: 0.5

Cascade Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Cannon Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Skylake-X

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

IACA 2.3

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 3.0

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

Coffee Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Kaby Lake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

Skylake

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (3 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

IACA 2.3

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 3.0

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

Broadwell

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (2 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

IACA 2.2

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50 (with the -no_interiteration flag: 0.50)
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 2.3

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 3.0

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p01+1*p23

Haswell

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 1.00
Number of μops
- Executed: 2
- Retire slots: 2
- Decoded (MITE): 2
- Microcode Sequencer (MS): 0
- Requires the complex decoder (2 other instructions can be decoded with simple decoders in the same cycle)
Port usage: 1*p015+1*p23

IACA 2.1

Latency: 7
Throughput
- Computed from the port usage: 0.50
- IACA: 0.50 (with the -no_interiteration flag: 0.50)
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 2.2

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50 (with the -no_interiteration flag: 0.50)
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 2.3

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p015+1*p23

IACA 3.0

Throughput
- Computed from the port usage: 0.50
- IACA: 0.50
Number of μops: 2
Port usage: 1*p01+1*p23

AMD Zen 5

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 0.50
Number of μops
- Executed: 1
Port usage: 1*FP12

Documentation

Latency: 1
Throughput: 0.50
Number of μops: 1
Port usage: FP1/2

AMD Zen 4

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 0.50
- Measured (unrolled): 0.50
Number of μops
- Executed: 1
Port usage: 1*FP12

AMD Zen 3

Measurements

Latencies
Throughput
- Computed from the port usage: 0.50
- Measured (loop): 1.00
- Measured (unrolled): 1.00
Number of μops
- Executed: 1
Port usage: 1*FP01

AMD Zen 2

Measurements

Latencies
Throughput
- Computed from the port usage: 1.00
- Measured (loop): 1.00
- Measured (unrolled): 1.00
Number of μops
- Executed: 1
Port usage: 1*FP2

AMD Zen+

Measurements

Latencies
Throughput
- Measured (loop): 1.00
- Measured (unrolled): 1.00
Number of μops
- Executed: 2