MOV (M32, I32)

With unroll_count=500 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.92
- UOPS_RETIRED.ANY: 2.0
- RETIRE_SLOTS: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.92
- UOPS_RETIRED.ANY: 2.2
- RETIRE_SLOTS: 1.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.92
- UOPS_RETIRED.ANY: 2.02
- RETIRE_SLOTS: 1.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 3.7
- UOPS_RETIRED.ANY: 8.0
- RETIRE_SLOTS: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.0
- Reference cycles: 3.69
- UOPS_RETIRED.ANY: 9.0
- RETIRE_SLOTS: 5.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.0
- Reference cycles: 3.69
- UOPS_RETIRED.ANY: 8.1
- RETIRE_SLOTS: 4.1
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.0
- Reference cycles: 7.32
- UOPS_RETIRED.ANY: 16.0
- RETIRE_SLOTS: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 7.4
- UOPS_RETIRED.ANY: 18.0
- RETIRE_SLOTS: 10.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.01
- Reference cycles: 7.4
- UOPS_RETIRED.ANY: 16.2
- RETIRE_SLOTS: 8.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.0
- Reference cycles: 14.88
- UOPS_RETIRED.ANY: 32.0
- RETIRE_SLOTS: 16.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 14.78
- UOPS_RETIRED.ANY: 34.0
- RETIRE_SLOTS: 18.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 14.77
- UOPS_RETIRED.ANY: 32.2
- RETIRE_SLOTS: 16.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.94
- UOPS_RETIRED.ANY: 2.0
- RETIRE_SLOTS: 2.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.92
- UOPS_RETIRED.ANY: 2.2
- RETIRE_SLOTS: 2.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.92
- UOPS_RETIRED.ANY: 2.02
- RETIRE_SLOTS: 2.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 3.68
- UOPS_RETIRED.ANY: 8.0
- RETIRE_SLOTS: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.01

With loop_count=1000 and unroll_count=2

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.01
- Reference cycles: 3.7
- UOPS_RETIRED.ANY: 9.0
- RETIRE_SLOTS: 9.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.0
- Reference cycles: 3.7
- UOPS_RETIRED.ANY: 8.1
- RETIRE_SLOTS: 8.1
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.01
- Reference cycles: 7.36
- UOPS_RETIRED.ANY: 16.0
- RETIRE_SLOTS: 16.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.01
- UOPS_PORT_1: 0.02
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.01

With loop_count=1000 and unroll_count=1

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 7.4
- UOPS_RETIRED.ANY: 18.0
- RETIRE_SLOTS: 18.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.01
- Reference cycles: 7.4
- UOPS_RETIRED.ANY: 16.2
- RETIRE_SLOTS: 16.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.07
- Reference cycles: 14.76
- UOPS_RETIRED.ANY: 32.05
- RETIRE_SLOTS: 32.05
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.01
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 14.78
- UOPS_RETIRED.ANY: 34.0
- RETIRE_SLOTS: 34.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 16.01
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 14.76
- UOPS_RETIRED.ANY: 32.2
- RETIRE_SLOTS: 32.2
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 16.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- INST_DECODED.DEC0: 0.0

MOV (M32, I32) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10