MOV_89 (R32, R32)

With unroll_count=500 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 0.31
- Reference cycles: 0.29
- UOPS_EXECUTED.THREAD: 0.55
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.13
- UOPS_PORT_1: 0.13
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.14
- UOPS_PORT_6: 0.15
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.3

With loop_count=1000 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 0.4
- Reference cycles: 0.32
- UOPS_EXECUTED.THREAD: 0.6
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 1.1
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.1
- UOPS_PORT_1: 0.15
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.15
- UOPS_PORT_6: 0.2
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.4

With loop_count=100 and unroll_count=100

Code:

   0:	45 8b c1             	mov    r8d,r9d

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 0.26
- Reference cycles: 0.2
- UOPS_EXECUTED.THREAD: 0.63
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.14
- UOPS_PORT_1: 0.16
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.17
- UOPS_PORT_6: 0.17
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 1.25
- Reference cycles: 1.1
- UOPS_EXECUTED.THREAD: 2.13
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.53
- UOPS_PORT_6: 0.59
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=1000 and unroll_count=2

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1.51
- Reference cycles: 1.24
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 4.51
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.67
- UOPS_PORT_1: 0.67
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.67
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.5

With loop_count=100 and unroll_count=20

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 1.02
- Reference cycles: 0.8
- UOPS_EXECUTED.THREAD: 2.54
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.57
- UOPS_PORT_1: 0.64
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.66
- UOPS_PORT_6: 0.67
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 2.51
- Reference cycles: 1.95
- UOPS_EXECUTED.THREAD: 4.33
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.02
- UOPS_PORT_1: 1.04
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.01
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.1
- UOPS_PORT_6: 1.19
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.44

With loop_count=1000 and unroll_count=1

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 3.02
- Reference cycles: 2.48
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 9.03
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.34
- UOPS_PORT_1: 1.34
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.34
- UOPS_PORT_6: 1.99
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.01

With loop_count=100 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 2.05
- Reference cycles: 1.61
- UOPS_EXECUTED.THREAD: 5.07
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.15
- UOPS_PORT_1: 1.27
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.32
- UOPS_PORT_6: 1.35
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 12 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Show nanoBench command
Results:
- Instructions retired: 12.0
- Core cycles: 3.76
- Reference cycles: 2.92
- UOPS_EXECUTED.THREAD: 6.46
- RETIRE_SLOTS: 12.0
- UOPS_MITE: 12.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.5
- UOPS_PORT_1: 1.52
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.01
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.61
- UOPS_PORT_6: 1.79
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.69

With loop_count=1000 and unroll_count=1

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Show nanoBench command
Results:
- Instructions retired: 14.0
- Core cycles: 3.29
- Reference cycles: 2.68
- UOPS_EXECUTED.THREAD: 8.13
- RETIRE_SLOTS: 13.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.84
- UOPS_PORT_1: 1.97
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.04
- UOPS_PORT_6: 2.29
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Show nanoBench command
Results:
- Instructions retired: 12.2
- Core cycles: 3.05
- Reference cycles: 2.46
- UOPS_EXECUTED.THREAD: 7.57
- RETIRE_SLOTS: 12.1
- UOPS_MITE: 0.12
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.7
- UOPS_PORT_1: 1.85
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.91
- UOPS_PORT_6: 2.12
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With "clean" inputs

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 0.31
- Reference cycles: 0.24
- UOPS_EXECUTED.THREAD: 0.55
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.13
- UOPS_PORT_1: 0.13
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.14
- UOPS_PORT_6: 0.15
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.3

With loop_count=1000 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 0.4
- Reference cycles: 0.32
- UOPS_EXECUTED.THREAD: 0.6
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 1.1
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.1
- UOPS_PORT_1: 0.15
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.15
- UOPS_PORT_6: 0.2
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.4

With loop_count=100 and unroll_count=100

Code:

   0:	45 8b c1             	mov    r8d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 0.26
- Reference cycles: 0.2
- UOPS_EXECUTED.THREAD: 0.63
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.14
- UOPS_PORT_1: 0.16
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.17
- UOPS_PORT_6: 0.17
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 1.25
- Reference cycles: 1.1
- UOPS_EXECUTED.THREAD: 2.13
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.54
- UOPS_PORT_6: 0.59
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=1000 and unroll_count=2

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1.51
- Reference cycles: 1.22
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 4.51
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.67
- UOPS_PORT_1: 0.67
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.67
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.5

With loop_count=100 and unroll_count=20

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 1.02
- Reference cycles: 0.82
- UOPS_EXECUTED.THREAD: 2.54
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.57
- UOPS_PORT_1: 0.64
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.66
- UOPS_PORT_6: 0.67
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 2.51
- Reference cycles: 1.46
- UOPS_EXECUTED.THREAD: 4.33
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.01
- UOPS_PORT_1: 1.03
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.01
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.1
- UOPS_PORT_6: 1.19
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.44

With loop_count=1000 and unroll_count=1

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 3.02
- Reference cycles: 2.41
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 9.03
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.34
- UOPS_PORT_1: 1.34
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.34
- UOPS_PORT_6: 1.99
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.01

With loop_count=100 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 2.05
- Reference cycles: 1.61
- UOPS_EXECUTED.THREAD: 5.07
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.14
- UOPS_PORT_1: 1.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.31
- UOPS_PORT_6: 1.35
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 12 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 12.0
- Core cycles: 3.76
- Reference cycles: 3.41
- UOPS_EXECUTED.THREAD: 6.46
- RETIRE_SLOTS: 12.0
- UOPS_MITE: 12.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.5
- UOPS_PORT_1: 1.53
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.01
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.61
- UOPS_PORT_6: 1.79
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 3.69

With loop_count=1000 and unroll_count=1

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 14.0
- Core cycles: 3.29
- Reference cycles: 2.6
- UOPS_EXECUTED.THREAD: 8.13
- RETIRE_SLOTS: 13.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.84
- UOPS_PORT_1: 1.97
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.04
- UOPS_PORT_6: 2.29
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	45 8b c1             	mov    r8d,r9d
   3:	45 8b d1             	mov    r10d,r9d
   6:	45 8b d9             	mov    r11d,r9d
   9:	45 8b e1             	mov    r12d,r9d
   c:	45 8b e9             	mov    r13d,r9d
   f:	45 8b f1             	mov    r14d,r9d
  12:	41 8b d9             	mov    ebx,r9d
  15:	41 8b c9             	mov    ecx,r9d
  18:	41 8b d1             	mov    edx,r9d
  1b:	41 8b f9             	mov    edi,r9d
  1e:	41 8b f1             	mov    esi,r9d
  21:	41 8b e9             	mov    ebp,r9d

Init:
```
xor R9D, R9D
```
Show nanoBench command
Results:
- Instructions retired: 12.2
- Core cycles: 3.05
- Reference cycles: 2.53
- UOPS_EXECUTED.THREAD: 7.57
- RETIRE_SLOTS: 12.1
- UOPS_MITE: 0.12
- UOPS_MS: 0.0
- UOPS_PORT_0: 1.7
- UOPS_PORT_1: 1.85
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 1.91
- UOPS_PORT_6: 2.12
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With the same register for for different operands

With unroll_count=500 and no inner loop

Code:

   0:	45 8b c0             	mov    r8d,r8d

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.78
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.25
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.25
- UOPS_PORT_6: 0.25
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	45 8b c0             	mov    r8d,r8d

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.79
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 1.11
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.25
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.26
- UOPS_PORT_6: 0.35
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.3

With loop_count=100 and unroll_count=100

Code:

   0:	45 8b c0             	mov    r8d,r8d

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.79
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.24
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.25
- UOPS_PORT_6: 0.26
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With "clean" inputs

With unroll_count=500 and no inner loop

Code:

   0:	45 8b c0             	mov    r8d,r8d

Init:
```
xor R8D, R8D
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.73
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.25
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.25
- UOPS_PORT_6: 0.25
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	45 8b c0             	mov    r8d,r8d

Init:
```
xor R8D, R8D
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 0.8
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 1.11
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.25
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.26
- UOPS_PORT_6: 0.35
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.3

With loop_count=100 and unroll_count=100

Code:

   0:	45 8b c0             	mov    r8d,r8d

Init:
```
xor R8D, R8D
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 0.8
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.25
- UOPS_PORT_1: 0.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.25
- UOPS_PORT_6: 0.26
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

MOV_89 (R32, R32) - Throughput and Uops

With different registers for different operands

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 12 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With "clean" inputs

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 12 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With the same register for for different operands

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With "clean" inputs

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100