MUL (R32)

With unroll_count=500 and no inner loop

Code:
```
   0:	41 f7 e0             	mul    r8d
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 4.28
- Reference cycles: 3.81
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 3.0
- UOPS_MITE: 3.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.71
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.58
- UOPS_PORT_6: 0.71
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With unroll_count=500, no inner loop, and 1 NOP

Code:

   0:	41 f7 e0             	mul    r8d
   3:	90                   	nop

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 4.32
- Reference cycles: 3.9
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.71
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.57
- UOPS_PORT_6: 0.72
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With unroll_count=500, no inner loop, and 2 NOPs

Code:

   0:	41 f7 e0             	mul    r8d
   3:	90                   	nop
   4:	90                   	nop

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 4.29
- Reference cycles: 3.72
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 5.0
- UOPS_MITE: 5.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.71
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.6
- UOPS_PORT_6: 0.7
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With unroll_count=500, no inner loop, and 3 NOPs

Code:

   0:	41 f7 e0             	mul    r8d
   3:	90                   	nop
   4:	90                   	nop
   5:	90                   	nop

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.2
- Reference cycles: 3.68
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 6.0
- UOPS_MITE: 6.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.73
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.62
- UOPS_PORT_6: 0.66
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=10

Code:
```
   0:	41 f7 e0             	mul    r8d
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 4.23
- Reference cycles: 3.76
- UOPS_EXECUTED.THREAD: 3.1
- RETIRE_SLOTS: 3.1
- UOPS_MITE: 3.11
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.69
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.62
- UOPS_PORT_6: 0.79
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	40                   	rex
   2:	40                   	rex
   3:	40                   	rex
   4:	40                   	rex
   5:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 4.24
- Reference cycles: 3.76
- UOPS_EXECUTED.THREAD: 3.1
- RETIRE_SLOTS: 3.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.69
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.62
- UOPS_PORT_6: 0.79
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:
```
   0:	41 f7 e0             	mul    r8d
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 4.25
- Reference cycles: 3.78
- UOPS_EXECUTED.THREAD: 3.01
- RETIRE_SLOTS: 3.01
- UOPS_MITE: 3.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.69
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.61
- UOPS_PORT_6: 0.71
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	40                   	rex
   2:	40                   	rex
   3:	40                   	rex
   4:	40                   	rex
   5:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 4.25
- Reference cycles: 3.78
- UOPS_EXECUTED.THREAD: 3.01
- RETIRE_SLOTS: 3.01
- UOPS_MITE: 0.03
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.69
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.61
- UOPS_PORT_6: 0.71
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

Code:

   0:	48 31 c0             	xor    rax,rax
   3:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 1.0
- Reference cycles: 0.98
- UOPS_EXECUTED.THREAD: 3.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.76
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.6
- UOPS_PORT_6: 0.64
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=10

Code:

   0:	48 31 c0             	xor    rax,rax
   3:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 2.2
- Core cycles: 1.1
- Reference cycles: 0.98
- UOPS_EXECUTED.THREAD: 3.1
- RETIRE_SLOTS: 4.1
- UOPS_MITE: 4.1
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.8
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.6
- UOPS_PORT_6: 0.7
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.1

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	48 31 c0             	xor    rax,rax
   3:	40                   	rex
   4:	40                   	rex
   5:	40                   	rex
   6:	40                   	rex
   7:	40                   	rex
   8:	40                   	rex
   9:	40                   	rex
   a:	40                   	rex
   b:	40                   	rex
   c:	40                   	rex
   d:	40                   	rex
   e:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 2.2
- Core cycles: 1.18
- Reference cycles: 1.04
- UOPS_EXECUTED.THREAD: 3.1
- RETIRE_SLOTS: 4.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.74
- UOPS_PORT_1: 1.02
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.56
- UOPS_PORT_6: 0.8
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	48 31 c0             	xor    rax,rax
   3:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 2.02
- Core cycles: 1.01
- Reference cycles: 0.9
- UOPS_EXECUTED.THREAD: 3.01
- RETIRE_SLOTS: 4.01
- UOPS_MITE: 4.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.82
- UOPS_PORT_1: 1.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.55
- UOPS_PORT_6: 0.64
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.01

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

Code:

   0:	48 31 c0             	xor    rax,rax
   3:	40                   	rex
   4:	40                   	rex
   5:	40                   	rex
   6:	40                   	rex
   7:	40                   	rex
   8:	40                   	rex
   9:	40                   	rex
   a:	40                   	rex
   b:	40                   	rex
   c:	40                   	rex
   d:	40                   	rex
   e:	41 f7 e0             	mul    r8d

Show nanoBench command
Results:
- Instructions retired: 2.02
- Core cycles: 1.13
- Reference cycles: 1.0
- UOPS_EXECUTED.THREAD: 3.01
- RETIRE_SLOTS: 4.01
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.75
- UOPS_PORT_1: 1.01
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.54
- UOPS_PORT_6: 0.72
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

MUL (R32) - Throughput and Uops

With unroll_count=500 and no inner loop

With unroll_count=500, no inner loop, and 1 NOP

With unroll_count=500, no inner loop, and 2 NOPs

With unroll_count=500, no inner loop, and 3 NOPs

With loop_count=1000 and unroll_count=10

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

With loop_count=100 and unroll_count=100

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

With additional dependency-breaking instructions

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

With loop_count=100 and unroll_count=100

With loop_count=100, unroll_count=100, and padding (redundant prefixes)