INC_LOCK (M32)

With unroll_count=500 and no inner loop

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 20.0
- Reference cycles: 9.98
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 0.0
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.72
- UOPS_PORT_1: 0.8
- UOPS_PORT_5: 0.75
- UOPS_PORT_6: 1.74
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.65
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With unroll_count=500, no inner loop, and 1 NOP

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	90                   	nop

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 20.01
- Reference cycles: 9.78
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 1.0
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.77
- UOPS_PORT_1: 0.8
- UOPS_PORT_5: 0.78
- UOPS_PORT_6: 1.8
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.76
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=10

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 20.0
- Reference cycles: 9.98
- UOPS_EXECUTED.THREAD: 6.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.1
- UOPS_MS: 8.01
- UOPS_PORT_0: 0.75
- UOPS_PORT_1: 0.79
- UOPS_PORT_5: 0.76
- UOPS_PORT_6: 1.8
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.6
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With loop_count=100 and unroll_count=100

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 20.0
- Reference cycles: 9.97
- UOPS_EXECUTED.THREAD: 6.01
- RETIRE_SLOTS: 8.01
- UOPS_MITE: 0.01
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.75
- UOPS_PORT_1: 0.77
- UOPS_PORT_5: 0.76
- UOPS_PORT_6: 1.73
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.6
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 72.02
- Reference cycles: 35.79
- UOPS_EXECUTED.THREAD: 24.0
- RETIRE_SLOTS: 32.0
- UOPS_MITE: 0.0
- UOPS_MS: 32.0
- UOPS_PORT_0: 3.63
- UOPS_PORT_1: 4.12
- UOPS_PORT_5: 3.84
- UOPS_PORT_6: 7.67
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.49
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 72.0
- Reference cycles: 35.98
- UOPS_EXECUTED.THREAD: 24.5
- RETIRE_SLOTS: 32.5
- UOPS_MITE: 0.5
- UOPS_MS: 32.03
- UOPS_PORT_0: 3.67
- UOPS_PORT_1: 4.03
- UOPS_PORT_5: 4.2
- UOPS_PORT_6: 8.1
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.51
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.5

With loop_count=100 and unroll_count=20

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 72.0
- Reference cycles: 35.93
- UOPS_EXECUTED.THREAD: 24.05
- RETIRE_SLOTS: 32.05
- UOPS_MITE: 0.05
- UOPS_MS: 32.0
- UOPS_PORT_0: 3.75
- UOPS_PORT_1: 3.85
- UOPS_PORT_5: 3.94
- UOPS_PORT_6: 7.72
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.41
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 144.04
- Reference cycles: 71.76
- UOPS_EXECUTED.THREAD: 48.0
- RETIRE_SLOTS: 64.0
- UOPS_MITE: 0.0
- UOPS_MS: 64.0
- UOPS_PORT_0: 7.25
- UOPS_PORT_1: 8.21
- UOPS_PORT_5: 7.67
- UOPS_PORT_6: 15.33
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 20.95
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 144.01
- Reference cycles: 71.95
- UOPS_EXECUTED.THREAD: 49.0
- RETIRE_SLOTS: 65.0
- UOPS_MITE: 1.0
- UOPS_MS: 64.07
- UOPS_PORT_0: 7.34
- UOPS_PORT_1: 8.07
- UOPS_PORT_5: 8.4
- UOPS_PORT_6: 16.2
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 21.01
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=100 and unroll_count=10

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 144.01
- Reference cycles: 71.97
- UOPS_EXECUTED.THREAD: 48.1
- RETIRE_SLOTS: 64.1
- UOPS_MITE: 0.1
- UOPS_MS: 64.0
- UOPS_PORT_0: 7.49
- UOPS_PORT_1: 7.69
- UOPS_PORT_5: 7.88
- UOPS_PORT_6: 15.45
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 20.82
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]
  27:	f0 41 ff 46 20       	lock inc DWORD PTR [r14+0x20]
  2c:	f0 41 ff 46 24       	lock inc DWORD PTR [r14+0x24]
  31:	f0 41 ff 46 28       	lock inc DWORD PTR [r14+0x28]
  36:	f0 41 ff 46 2c       	lock inc DWORD PTR [r14+0x2c]
  3b:	f0 41 ff 46 30       	lock inc DWORD PTR [r14+0x30]
  40:	f0 41 ff 46 34       	lock inc DWORD PTR [r14+0x34]
  45:	f0 41 ff 46 38       	lock inc DWORD PTR [r14+0x38]
  4a:	f0 41 ff 46 3c       	lock inc DWORD PTR [r14+0x3c]

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 288.03
- Reference cycles: 143.52
- UOPS_EXECUTED.THREAD: 96.0
- RETIRE_SLOTS: 128.0
- UOPS_MITE: 0.0
- UOPS_MS: 128.0
- UOPS_PORT_0: 14.61
- UOPS_PORT_1: 16.3
- UOPS_PORT_5: 15.47
- UOPS_PORT_6: 30.37
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.62
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]
  27:	f0 41 ff 46 20       	lock inc DWORD PTR [r14+0x20]
  2c:	f0 41 ff 46 24       	lock inc DWORD PTR [r14+0x24]
  31:	f0 41 ff 46 28       	lock inc DWORD PTR [r14+0x28]
  36:	f0 41 ff 46 2c       	lock inc DWORD PTR [r14+0x2c]
  3b:	f0 41 ff 46 30       	lock inc DWORD PTR [r14+0x30]
  40:	f0 41 ff 46 34       	lock inc DWORD PTR [r14+0x34]
  45:	f0 41 ff 46 38       	lock inc DWORD PTR [r14+0x38]
  4a:	f0 41 ff 46 3c       	lock inc DWORD PTR [r14+0x3c]

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 288.01
- Reference cycles: 143.73
- UOPS_EXECUTED.THREAD: 97.01
- RETIRE_SLOTS: 129.02
- UOPS_MITE: 0.99
- UOPS_MS: 128.07
- UOPS_PORT_0: 14.96
- UOPS_PORT_1: 15.56
- UOPS_PORT_5: 15.6
- UOPS_PORT_6: 31.68
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.6
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=100 and unroll_count=10

Code:

   0:	f0 41 ff 06          	lock inc DWORD PTR [r14]
   4:	f0 41 ff 46 04       	lock inc DWORD PTR [r14+0x4]
   9:	f0 41 ff 46 08       	lock inc DWORD PTR [r14+0x8]
   e:	f0 41 ff 46 0c       	lock inc DWORD PTR [r14+0xc]
  13:	f0 41 ff 46 10       	lock inc DWORD PTR [r14+0x10]
  18:	f0 41 ff 46 14       	lock inc DWORD PTR [r14+0x14]
  1d:	f0 41 ff 46 18       	lock inc DWORD PTR [r14+0x18]
  22:	f0 41 ff 46 1c       	lock inc DWORD PTR [r14+0x1c]
  27:	f0 41 ff 46 20       	lock inc DWORD PTR [r14+0x20]
  2c:	f0 41 ff 46 24       	lock inc DWORD PTR [r14+0x24]
  31:	f0 41 ff 46 28       	lock inc DWORD PTR [r14+0x28]
  36:	f0 41 ff 46 2c       	lock inc DWORD PTR [r14+0x2c]
  3b:	f0 41 ff 46 30       	lock inc DWORD PTR [r14+0x30]
  40:	f0 41 ff 46 34       	lock inc DWORD PTR [r14+0x34]
  45:	f0 41 ff 46 38       	lock inc DWORD PTR [r14+0x38]
  4a:	f0 41 ff 46 3c       	lock inc DWORD PTR [r14+0x3c]

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 288.0
- Reference cycles: 143.73
- UOPS_EXECUTED.THREAD: 96.1
- RETIRE_SLOTS: 128.1
- UOPS_MITE: 0.1
- UOPS_MS: 128.0
- UOPS_PORT_0: 14.82
- UOPS_PORT_1: 15.62
- UOPS_PORT_5: 15.8
- UOPS_PORT_6: 30.66
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.6
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 20.0
- Reference cycles: 9.78
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 0.0
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.72
- UOPS_PORT_1: 0.8
- UOPS_PORT_5: 0.75
- UOPS_PORT_6: 1.74
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.65
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With unroll_count=500, no inner loop, and 1 NOP

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	90                   	nop

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 20.01
- Reference cycles: 9.78
- UOPS_EXECUTED.THREAD: 6.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 1.0
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.77
- UOPS_PORT_1: 0.8
- UOPS_PORT_5: 0.78
- UOPS_PORT_6: 1.8
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.76
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=10

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 20.0
- Reference cycles: 9.98
- UOPS_EXECUTED.THREAD: 6.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.1
- UOPS_MS: 8.01
- UOPS_PORT_0: 0.75
- UOPS_PORT_1: 0.79
- UOPS_PORT_5: 0.76
- UOPS_PORT_6: 1.8
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.6
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With loop_count=100 and unroll_count=100

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 20.0
- Reference cycles: 9.99
- UOPS_EXECUTED.THREAD: 6.01
- RETIRE_SLOTS: 8.01
- UOPS_MITE: 0.01
- UOPS_MS: 8.0
- UOPS_PORT_0: 0.75
- UOPS_PORT_1: 0.77
- UOPS_PORT_5: 0.76
- UOPS_PORT_6: 1.73
- UOPS_PORT_23: 1.0
- UOPS_PORT_49: 1.6
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 72.02
- Reference cycles: 36.4
- UOPS_EXECUTED.THREAD: 24.0
- RETIRE_SLOTS: 32.0
- UOPS_MITE: 0.0
- UOPS_MS: 32.0
- UOPS_PORT_0: 3.63
- UOPS_PORT_1: 4.12
- UOPS_PORT_5: 3.84
- UOPS_PORT_6: 7.67
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.49
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 72.0
- Reference cycles: 35.98
- UOPS_EXECUTED.THREAD: 24.5
- RETIRE_SLOTS: 32.5
- UOPS_MITE: 0.5
- UOPS_MS: 32.03
- UOPS_PORT_0: 3.67
- UOPS_PORT_1: 4.03
- UOPS_PORT_5: 4.2
- UOPS_PORT_6: 8.1
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.51
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.5

With loop_count=100 and unroll_count=20

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 72.0
- Reference cycles: 35.93
- UOPS_EXECUTED.THREAD: 24.05
- RETIRE_SLOTS: 32.05
- UOPS_MITE: 0.05
- UOPS_MS: 32.0
- UOPS_PORT_0: 3.75
- UOPS_PORT_1: 3.85
- UOPS_PORT_5: 3.94
- UOPS_PORT_6: 7.72
- UOPS_PORT_23: 4.0
- UOPS_PORT_49: 10.41
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 144.05
- Reference cycles: 71.59
- UOPS_EXECUTED.THREAD: 48.0
- RETIRE_SLOTS: 64.0
- UOPS_MITE: 0.02
- UOPS_MS: 64.0
- UOPS_PORT_0: 7.25
- UOPS_PORT_1: 8.21
- UOPS_PORT_5: 7.67
- UOPS_PORT_6: 15.33
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 20.95
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 144.01
- Reference cycles: 71.97
- UOPS_EXECUTED.THREAD: 49.0
- RETIRE_SLOTS: 65.0
- UOPS_MITE: 1.0
- UOPS_MS: 64.07
- UOPS_PORT_0: 7.34
- UOPS_PORT_1: 8.07
- UOPS_PORT_5: 8.4
- UOPS_PORT_6: 16.2
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 21.01
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=100 and unroll_count=10

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 144.0
- Reference cycles: 71.97
- UOPS_EXECUTED.THREAD: 48.1
- RETIRE_SLOTS: 64.1
- UOPS_MITE: 0.1
- UOPS_MS: 64.0
- UOPS_PORT_0: 7.49
- UOPS_PORT_1: 7.69
- UOPS_PORT_5: 7.88
- UOPS_PORT_6: 15.45
- UOPS_PORT_23: 8.0
- UOPS_PORT_49: 20.82
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]
  2f:	f0 43 ff 44 2e 20    	lock inc DWORD PTR [r14+r13*1+0x20]
  35:	f0 43 ff 44 2e 24    	lock inc DWORD PTR [r14+r13*1+0x24]
  3b:	f0 43 ff 44 2e 28    	lock inc DWORD PTR [r14+r13*1+0x28]
  41:	f0 43 ff 44 2e 2c    	lock inc DWORD PTR [r14+r13*1+0x2c]
  47:	f0 43 ff 44 2e 30    	lock inc DWORD PTR [r14+r13*1+0x30]
  4d:	f0 43 ff 44 2e 34    	lock inc DWORD PTR [r14+r13*1+0x34]
  53:	f0 43 ff 44 2e 38    	lock inc DWORD PTR [r14+r13*1+0x38]
  59:	f0 43 ff 44 2e 3c    	lock inc DWORD PTR [r14+r13*1+0x3c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 288.03
- Reference cycles: 144.56
- UOPS_EXECUTED.THREAD: 96.0
- RETIRE_SLOTS: 128.0
- UOPS_MITE: 0.02
- UOPS_MS: 128.0
- UOPS_PORT_0: 14.61
- UOPS_PORT_1: 16.3
- UOPS_PORT_5: 15.47
- UOPS_PORT_6: 30.37
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.62
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]
  2f:	f0 43 ff 44 2e 20    	lock inc DWORD PTR [r14+r13*1+0x20]
  35:	f0 43 ff 44 2e 24    	lock inc DWORD PTR [r14+r13*1+0x24]
  3b:	f0 43 ff 44 2e 28    	lock inc DWORD PTR [r14+r13*1+0x28]
  41:	f0 43 ff 44 2e 2c    	lock inc DWORD PTR [r14+r13*1+0x2c]
  47:	f0 43 ff 44 2e 30    	lock inc DWORD PTR [r14+r13*1+0x30]
  4d:	f0 43 ff 44 2e 34    	lock inc DWORD PTR [r14+r13*1+0x34]
  53:	f0 43 ff 44 2e 38    	lock inc DWORD PTR [r14+r13*1+0x38]
  59:	f0 43 ff 44 2e 3c    	lock inc DWORD PTR [r14+r13*1+0x3c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 288.01
- Reference cycles: 143.83
- UOPS_EXECUTED.THREAD: 97.01
- RETIRE_SLOTS: 129.01
- UOPS_MITE: 1.0
- UOPS_MS: 128.07
- UOPS_PORT_0: 14.96
- UOPS_PORT_1: 15.56
- UOPS_PORT_5: 15.6
- UOPS_PORT_6: 31.68
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.6
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=100 and unroll_count=10

Code:

   0:	f0 43 ff 04 2e       	lock inc DWORD PTR [r14+r13*1]
   5:	f0 43 ff 44 2e 04    	lock inc DWORD PTR [r14+r13*1+0x4]
   b:	f0 43 ff 44 2e 08    	lock inc DWORD PTR [r14+r13*1+0x8]
  11:	f0 43 ff 44 2e 0c    	lock inc DWORD PTR [r14+r13*1+0xc]
  17:	f0 43 ff 44 2e 10    	lock inc DWORD PTR [r14+r13*1+0x10]
  1d:	f0 43 ff 44 2e 14    	lock inc DWORD PTR [r14+r13*1+0x14]
  23:	f0 43 ff 44 2e 18    	lock inc DWORD PTR [r14+r13*1+0x18]
  29:	f0 43 ff 44 2e 1c    	lock inc DWORD PTR [r14+r13*1+0x1c]
  2f:	f0 43 ff 44 2e 20    	lock inc DWORD PTR [r14+r13*1+0x20]
  35:	f0 43 ff 44 2e 24    	lock inc DWORD PTR [r14+r13*1+0x24]
  3b:	f0 43 ff 44 2e 28    	lock inc DWORD PTR [r14+r13*1+0x28]
  41:	f0 43 ff 44 2e 2c    	lock inc DWORD PTR [r14+r13*1+0x2c]
  47:	f0 43 ff 44 2e 30    	lock inc DWORD PTR [r14+r13*1+0x30]
  4d:	f0 43 ff 44 2e 34    	lock inc DWORD PTR [r14+r13*1+0x34]
  53:	f0 43 ff 44 2e 38    	lock inc DWORD PTR [r14+r13*1+0x38]
  59:	f0 43 ff 44 2e 3c    	lock inc DWORD PTR [r14+r13*1+0x3c]

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 288.0
- Reference cycles: 143.73
- UOPS_EXECUTED.THREAD: 96.1
- RETIRE_SLOTS: 128.1
- UOPS_MITE: 0.1
- UOPS_MS: 128.0
- UOPS_PORT_0: 14.82
- UOPS_PORT_1: 15.62
- UOPS_PORT_5: 15.8
- UOPS_PORT_6: 30.66
- UOPS_PORT_23: 16.0
- UOPS_PORT_49: 41.6
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

INC_LOCK (M32) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With unroll_count=500, no inner loop, and 1 NOP

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With unroll_count=500, no inner loop, and 1 NOP

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10