CPUID

With unroll_count=500 and no inner loop

Code:

   0:	b8 00 00 00 00       	mov    eax,0x0
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 101.03
- Reference cycles: 111.49
- UOPS_EXECUTED.THREAD: 42.0
- RETIRE_SLOTS: 38.0
- UOPS_MITE: 2.0
- UOPS_MS: 43.0
- UOPS_PORT_0: 10.0
- UOPS_PORT_1: 8.79
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 21.24
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 00 00 00 00       	mov    eax,0x0
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 105.27
- Reference cycles: 115.2
- UOPS_EXECUTED.THREAD: 43.2
- RETIRE_SLOTS: 39.0
- UOPS_MITE: 3.0
- UOPS_MS: 47.7
- UOPS_PORT_0: 10.0
- UOPS_PORT_1: 9.03
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 22.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=10 and unroll_count=1

Code:

   0:	b8 00 00 00 00       	mov    eax,0x0
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 105.25
- Reference cycles: 115.2
- UOPS_EXECUTED.THREAD: 43.2
- RETIRE_SLOTS: 39.0
- UOPS_MITE: 3.0
- UOPS_MS: 47.7
- UOPS_PORT_0: 10.0
- UOPS_PORT_1: 9.05
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 1.0
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 22.17
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With EAX=0x1, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 01 00 00 00       	mov    eax,0x1
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 346.51
- Reference cycles: 382.34
- UOPS_EXECUTED.THREAD: 91.0
- RETIRE_SLOTS: 82.0
- UOPS_MITE: 2.0
- UOPS_MS: 99.09
- UOPS_PORT_0: 20.83
- UOPS_PORT_1: 19.42
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 45.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 01 00 00 00       	mov    eax,0x1
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 350.87
- Reference cycles: 387.2
- UOPS_EXECUTED.THREAD: 92.2
- RETIRE_SLOTS: 83.0
- UOPS_MITE: 3.0
- UOPS_MS: 103.7
- UOPS_PORT_0: 20.7
- UOPS_PORT_1: 19.2
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 47.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 01 00 00 00       	mov    eax,0x1
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 350.87
- Reference cycles: 387.2
- UOPS_EXECUTED.THREAD: 92.2
- RETIRE_SLOTS: 83.0
- UOPS_MITE: 3.0
- UOPS_MS: 103.7
- UOPS_PORT_0: 20.72
- UOPS_PORT_1: 19.18
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 47.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x2, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 02 00 00 00       	mov    eax,0x2
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 250.01
- Reference cycles: 275.89
- UOPS_EXECUTED.THREAD: 88.67
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 2.0
- UOPS_MS: 153.09
- UOPS_PORT_0: 19.79
- UOPS_PORT_1: 18.04
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 43.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 02 00 00 00       	mov    eax,0x2
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 253.95
- Reference cycles: 280.53
- UOPS_EXECUTED.THREAD: 89.8
- RETIRE_SLOTS: 58.0
- UOPS_MITE: 3.0
- UOPS_MS: 157.6
- UOPS_PORT_0: 19.77
- UOPS_PORT_1: 17.87
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 02 00 00 00       	mov    eax,0x2
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 253.98
- Reference cycles: 280.0
- UOPS_EXECUTED.THREAD: 89.87
- RETIRE_SLOTS: 58.0
- UOPS_MITE: 3.0
- UOPS_MS: 157.6
- UOPS_PORT_0: 19.73
- UOPS_PORT_1: 17.8
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x3, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 03 00 00 00       	mov    eax,0x3
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 215.01
- Reference cycles: 237.25
- UOPS_EXECUTED.THREAD: 75.67
- RETIRE_SLOTS: 47.0
- UOPS_MITE: 2.0
- UOPS_MS: 138.09
- UOPS_PORT_0: 15.84
- UOPS_PORT_1: 16.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 38.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 03 00 00 00       	mov    eax,0x3
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 219.5
- Reference cycles: 242.67
- UOPS_EXECUTED.THREAD: 77.2
- RETIRE_SLOTS: 48.0
- UOPS_MITE: 3.0
- UOPS_MS: 142.7
- UOPS_PORT_0: 15.73
- UOPS_PORT_1: 15.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 40.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 03 00 00 00       	mov    eax,0x3
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 219.5
- Reference cycles: 243.2
- UOPS_EXECUTED.THREAD: 77.2
- RETIRE_SLOTS: 48.0
- UOPS_MITE: 3.0
- UOPS_MS: 142.7
- UOPS_PORT_0: 15.73
- UOPS_PORT_1: 15.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 40.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x4, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 04 00 00 00       	mov    eax,0x4
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 361.56
- Reference cycles: 350.61
- UOPS_EXECUTED.THREAD: 111.84
- RETIRE_SLOTS: 83.0
- UOPS_MITE: 2.0
- UOPS_MS: 171.09
- UOPS_PORT_0: 26.83
- UOPS_PORT_1: 26.25
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 04 00 00 00       	mov    eax,0x4
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 365.5
- Reference cycles: 355.2
- UOPS_EXECUTED.THREAD: 113.03
- RETIRE_SLOTS: 84.0
- UOPS_MITE: 3.0
- UOPS_MS: 175.7
- UOPS_PORT_0: 26.57
- UOPS_PORT_1: 26.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 54.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 04 00 00 00       	mov    eax,0x4
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 364.5
- Reference cycles: 355.2
- UOPS_EXECUTED.THREAD: 113.12
- RETIRE_SLOTS: 84.0
- UOPS_MITE: 3.0
- UOPS_MS: 175.7
- UOPS_PORT_0: 26.73
- UOPS_PORT_1: 25.92
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 54.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x5, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 05 00 00 00       	mov    eax,0x5
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 253.5
- Reference cycles: 245.82
- UOPS_EXECUTED.THREAD: 104.67
- RETIRE_SLOTS: 69.0
- UOPS_MITE: 2.0
- UOPS_MS: 181.09
- UOPS_PORT_0: 24.83
- UOPS_PORT_1: 23.04
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 51.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 05 00 00 00       	mov    eax,0x5
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 257.48
- Reference cycles: 250.13
- UOPS_EXECUTED.THREAD: 105.9
- RETIRE_SLOTS: 70.0
- UOPS_MITE: 3.0
- UOPS_MS: 185.7
- UOPS_PORT_0: 24.7
- UOPS_PORT_1: 22.8
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 53.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 05 00 00 00       	mov    eax,0x5
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 257.52
- Reference cycles: 251.2
- UOPS_EXECUTED.THREAD: 105.8
- RETIRE_SLOTS: 70.0
- UOPS_MITE: 3.0
- UOPS_MS: 185.7
- UOPS_PORT_0: 24.67
- UOPS_PORT_1: 22.93
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 53.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x6, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 06 00 00 00       	mov    eax,0x6
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 754.55
- Reference cycles: 731.7
- UOPS_EXECUTED.THREAD: 114.67
- RETIRE_SLOTS: 79.0
- UOPS_MITE: 2.0
- UOPS_MS: 193.09
- UOPS_PORT_0: 28.83
- UOPS_PORT_1: 24.08
- UOPS_PORT_2: 1.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 54.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 06 00 00 00       	mov    eax,0x6
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 757.8
- Reference cycles: 735.47
- UOPS_EXECUTED.THREAD: 116.0
- RETIRE_SLOTS: 80.0
- UOPS_MITE: 3.0
- UOPS_MS: 197.7
- UOPS_PORT_0: 28.72
- UOPS_PORT_1: 23.82
- UOPS_PORT_2: 1.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 56.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 06 00 00 00       	mov    eax,0x6
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 756.77
- Reference cycles: 735.47
- UOPS_EXECUTED.THREAD: 115.9
- RETIRE_SLOTS: 80.0
- UOPS_MITE: 3.0
- UOPS_MS: 197.7
- UOPS_PORT_0: 28.72
- UOPS_PORT_1: 23.8
- UOPS_PORT_2: 1.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 56.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x7, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 07 00 00 00       	mov    eax,0x7
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 257.51
- Reference cycles: 249.73
- UOPS_EXECUTED.THREAD: 102.67
- RETIRE_SLOTS: 67.0
- UOPS_MITE: 2.0
- UOPS_MS: 182.09
- UOPS_PORT_0: 23.83
- UOPS_PORT_1: 23.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 50.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 07 00 00 00       	mov    eax,0x7
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 261.6
- Reference cycles: 253.87
- UOPS_EXECUTED.THREAD: 103.83
- RETIRE_SLOTS: 68.0
- UOPS_MITE: 3.0
- UOPS_MS: 186.7
- UOPS_PORT_0: 23.73
- UOPS_PORT_1: 22.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 07 00 00 00       	mov    eax,0x7
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 261.55
- Reference cycles: 254.93
- UOPS_EXECUTED.THREAD: 103.83
- RETIRE_SLOTS: 68.0
- UOPS_MITE: 3.0
- UOPS_MS: 186.7
- UOPS_PORT_0: 23.73
- UOPS_PORT_1: 22.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x8, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 08 00 00 00       	mov    eax,0x8
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 238.95
- Reference cycles: 231.73
- UOPS_EXECUTED.THREAD: 92.56
- RETIRE_SLOTS: 56.0
- UOPS_MITE: 2.0
- UOPS_MS: 169.09
- UOPS_PORT_0: 19.89
- UOPS_PORT_1: 21.14
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 46.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 08 00 00 00       	mov    eax,0x8
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 242.85
- Reference cycles: 236.27
- UOPS_EXECUTED.THREAD: 93.9
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 3.0
- UOPS_MS: 173.7
- UOPS_PORT_0: 19.7
- UOPS_PORT_1: 20.82
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 48.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 08 00 00 00       	mov    eax,0x8
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 242.83
- Reference cycles: 236.8
- UOPS_EXECUTED.THREAD: 93.93
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 3.0
- UOPS_MS: 173.7
- UOPS_PORT_0: 19.67
- UOPS_PORT_1: 20.8
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 48.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x9, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 09 00 00 00       	mov    eax,0x9
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 259.13
- Reference cycles: 251.3
- UOPS_EXECUTED.THREAD: 100.71
- RETIRE_SLOTS: 63.0
- UOPS_MITE: 2.0
- UOPS_MS: 174.09
- UOPS_PORT_0: 23.79
- UOPS_PORT_1: 21.04
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 50.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 09 00 00 00       	mov    eax,0x9
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 263.12
- Reference cycles: 256.0
- UOPS_EXECUTED.THREAD: 101.9
- RETIRE_SLOTS: 64.0
- UOPS_MITE: 3.0
- UOPS_MS: 178.7
- UOPS_PORT_0: 23.72
- UOPS_PORT_1: 20.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 09 00 00 00       	mov    eax,0x9
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 263.17
- Reference cycles: 256.0
- UOPS_EXECUTED.THREAD: 102.0
- RETIRE_SLOTS: 64.0
- UOPS_MITE: 3.0
- UOPS_MS: 178.7
- UOPS_PORT_0: 23.72
- UOPS_PORT_1: 20.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0xa, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 0a 00 00 00       	mov    eax,0xa
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 255.18
- Reference cycles: 247.45
- UOPS_EXECUTED.THREAD: 110.67
- RETIRE_SLOTS: 71.0
- UOPS_MITE: 2.0
- UOPS_MS: 180.09
- UOPS_PORT_0: 25.84
- UOPS_PORT_1: 25.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 53.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0a 00 00 00       	mov    eax,0xa
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 258.5
- Reference cycles: 252.27
- UOPS_EXECUTED.THREAD: 112.2
- RETIRE_SLOTS: 72.0
- UOPS_MITE: 3.0
- UOPS_MS: 184.7
- UOPS_PORT_0: 25.73
- UOPS_PORT_1: 24.67
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 55.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0a 00 00 00       	mov    eax,0xa
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 259.5
- Reference cycles: 252.8
- UOPS_EXECUTED.THREAD: 112.2
- RETIRE_SLOTS: 72.0
- UOPS_MITE: 3.0
- UOPS_MS: 184.7
- UOPS_PORT_0: 25.57
- UOPS_PORT_1: 24.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 55.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0xb, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 0b 00 00 00       	mov    eax,0xb
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 242.01
- Reference cycles: 234.69
- UOPS_EXECUTED.THREAD: 104.67
- RETIRE_SLOTS: 76.0
- UOPS_MITE: 2.0
- UOPS_MS: 165.09
- UOPS_PORT_0: 24.83
- UOPS_PORT_1: 24.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 50.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0b 00 00 00       	mov    eax,0xb
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 246.03
- Reference cycles: 239.47
- UOPS_EXECUTED.THREAD: 105.83
- RETIRE_SLOTS: 77.0
- UOPS_MITE: 3.0
- UOPS_MS: 169.7
- UOPS_PORT_0: 24.73
- UOPS_PORT_1: 23.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0b 00 00 00       	mov    eax,0xb
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 246.03
- Reference cycles: 238.93
- UOPS_EXECUTED.THREAD: 105.83
- RETIRE_SLOTS: 77.0
- UOPS_MITE: 3.0
- UOPS_MS: 169.7
- UOPS_PORT_0: 24.7
- UOPS_PORT_1: 23.8
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 3.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 52.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0xc, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 0c 00 00 00       	mov    eax,0xc
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 261.01
- Reference cycles: 288.0
- UOPS_EXECUTED.THREAD: 111.67
- RETIRE_SLOTS: 65.0
- UOPS_MITE: 2.0
- UOPS_MS: 189.09
- UOPS_PORT_0: 23.83
- UOPS_PORT_1: 24.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 56.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0c 00 00 00       	mov    eax,0xc
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 264.9
- Reference cycles: 292.27
- UOPS_EXECUTED.THREAD: 112.87
- RETIRE_SLOTS: 66.0
- UOPS_MITE: 3.0
- UOPS_MS: 193.7
- UOPS_PORT_0: 23.72
- UOPS_PORT_1: 23.9
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 58.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0c 00 00 00       	mov    eax,0xc
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 265.1
- Reference cycles: 292.8
- UOPS_EXECUTED.THREAD: 112.83
- RETIRE_SLOTS: 66.0
- UOPS_MITE: 3.0
- UOPS_MS: 193.7
- UOPS_PORT_0: 23.73
- UOPS_PORT_1: 23.9
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 58.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0xd, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 0d 00 00 00       	mov    eax,0xd
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 264.01
- Reference cycles: 291.33
- UOPS_EXECUTED.THREAD: 117.67
- RETIRE_SLOTS: 77.0
- UOPS_MITE: 2.0
- UOPS_MS: 184.09
- UOPS_PORT_0: 27.83
- UOPS_PORT_1: 28.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 55.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0d 00 00 00       	mov    eax,0xd
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 267.9
- Reference cycles: 296.0
- UOPS_EXECUTED.THREAD: 118.87
- RETIRE_SLOTS: 78.0
- UOPS_MITE: 3.0
- UOPS_MS: 188.7
- UOPS_PORT_0: 27.8
- UOPS_PORT_1: 27.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 57.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0d 00 00 00       	mov    eax,0xd
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 268.1
- Reference cycles: 295.47
- UOPS_EXECUTED.THREAD: 118.83
- RETIRE_SLOTS: 78.0
- UOPS_MITE: 3.0
- UOPS_MS: 188.7
- UOPS_PORT_0: 27.73
- UOPS_PORT_1: 27.9
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 57.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0xe, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 0e 00 00 00       	mov    eax,0xe
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 264.01
- Reference cycles: 291.33
- UOPS_EXECUTED.THREAD: 117.67
- RETIRE_SLOTS: 77.0
- UOPS_MITE: 2.0
- UOPS_MS: 184.09
- UOPS_PORT_0: 27.83
- UOPS_PORT_1: 28.08
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 55.76
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0e 00 00 00       	mov    eax,0xe
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 268.2
- Reference cycles: 296.0
- UOPS_EXECUTED.THREAD: 118.8
- RETIRE_SLOTS: 78.0
- UOPS_MITE: 3.0
- UOPS_MS: 188.7
- UOPS_PORT_0: 27.8
- UOPS_PORT_1: 27.83
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 57.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 0e 00 00 00       	mov    eax,0xe
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 267.7
- Reference cycles: 296.0
- UOPS_EXECUTED.THREAD: 118.93
- RETIRE_SLOTS: 78.0
- UOPS_MITE: 3.0
- UOPS_MS: 188.7
- UOPS_PORT_0: 27.87
- UOPS_PORT_1: 27.82
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 57.3
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000000, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 00 00 00 80       	mov    eax,0x80000000
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 231.34
- Reference cycles: 255.26
- UOPS_EXECUTED.THREAD: 88.0
- RETIRE_SLOTS: 48.0
- UOPS_MITE: 2.0
- UOPS_MS: 156.09
- UOPS_PORT_0: 17.0
- UOPS_PORT_1: 16.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 43.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 00 00 00 80       	mov    eax,0x80000000
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 235.55
- Reference cycles: 262.4
- UOPS_EXECUTED.THREAD: 89.07
- RETIRE_SLOTS: 49.0
- UOPS_MITE: 3.0
- UOPS_MS: 160.17
- UOPS_PORT_0: 16.93
- UOPS_PORT_1: 15.97
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 00 00 00 80       	mov    eax,0x80000000
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 235.52
- Reference cycles: 260.27
- UOPS_EXECUTED.THREAD: 89.03
- RETIRE_SLOTS: 49.0
- UOPS_MITE: 3.0
- UOPS_MS: 160.03
- UOPS_PORT_0: 16.93
- UOPS_PORT_1: 15.97
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.17
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000001, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 01 00 00 80       	mov    eax,0x80000001
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 254.55
- Reference cycles: 280.86
- UOPS_EXECUTED.THREAD: 109.84
- RETIRE_SLOTS: 70.0
- UOPS_MITE: 2.0
- UOPS_MS: 176.42
- UOPS_PORT_0: 23.0
- UOPS_PORT_1: 21.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 54.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 01 00 00 80       	mov    eax,0x80000001
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 258.48
- Reference cycles: 284.8
- UOPS_EXECUTED.THREAD: 111.03
- RETIRE_SLOTS: 71.0
- UOPS_MITE: 3.0
- UOPS_MS: 181.03
- UOPS_PORT_0: 22.92
- UOPS_PORT_1: 20.98
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 56.18
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 01 00 00 80       	mov    eax,0x80000001
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 258.57
- Reference cycles: 284.8
- UOPS_EXECUTED.THREAD: 111.05
- RETIRE_SLOTS: 71.0
- UOPS_MITE: 3.0
- UOPS_MS: 181.1
- UOPS_PORT_0: 22.93
- UOPS_PORT_1: 20.97
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 56.22
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000002, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 02 00 00 80       	mov    eax,0x80000002
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 1204.3
- Reference cycles: 1328.89
- UOPS_EXECUTED.THREAD: 90.84
- RETIRE_SLOTS: 55.0
- UOPS_MITE: 2.0
- UOPS_MS: 157.43
- UOPS_PORT_0: 16.0
- UOPS_PORT_1: 16.25
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 43.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 02 00 00 80       	mov    eax,0x80000002
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1207.93
- Reference cycles: 1333.33
- UOPS_EXECUTED.THREAD: 92.05
- RETIRE_SLOTS: 56.0
- UOPS_MITE: 3.0
- UOPS_MS: 162.1
- UOPS_PORT_0: 15.9
- UOPS_PORT_1: 16.0
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.15
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 02 00 00 80       	mov    eax,0x80000002
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1207.77
- Reference cycles: 1332.8
- UOPS_EXECUTED.THREAD: 92.05
- RETIRE_SLOTS: 56.0
- UOPS_MITE: 3.0
- UOPS_MS: 162.1
- UOPS_PORT_0: 15.88
- UOPS_PORT_1: 16.02
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.15
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000003, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 03 00 00 80       	mov    eax,0x80000003
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 1264.75
- Reference cycles: 1226.42
- UOPS_EXECUTED.THREAD: 90.84
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 2.0
- UOPS_MS: 157.43
- UOPS_PORT_0: 15.98
- UOPS_PORT_1: 16.27
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 43.61
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 03 00 00 80       	mov    eax,0x80000003
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1269.1
- Reference cycles: 1232.0
- UOPS_EXECUTED.THREAD: 92.0
- RETIRE_SLOTS: 58.0
- UOPS_MITE: 3.0
- UOPS_MS: 161.9
- UOPS_PORT_0: 15.93
- UOPS_PORT_1: 15.97
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 03 00 00 80       	mov    eax,0x80000003
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1269.43
- Reference cycles: 1230.93
- UOPS_EXECUTED.THREAD: 92.03
- RETIRE_SLOTS: 58.0
- UOPS_MITE: 3.0
- UOPS_MS: 162.03
- UOPS_PORT_0: 15.93
- UOPS_PORT_1: 15.97
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 45.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000004, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 04 00 00 80       	mov    eax,0x80000004
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 1255.03
- Reference cycles: 1217.03
- UOPS_EXECUTED.THREAD: 83.84
- RETIRE_SLOTS: 58.0
- UOPS_MITE: 2.0
- UOPS_MS: 149.43
- UOPS_PORT_0: 16.0
- UOPS_PORT_1: 16.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 42.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 04 00 00 80       	mov    eax,0x80000004
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1254.6
- Reference cycles: 1215.47
- UOPS_EXECUTED.THREAD: 85.03
- RETIRE_SLOTS: 59.0
- UOPS_MITE: 3.0
- UOPS_MS: 154.03
- UOPS_PORT_0: 15.88
- UOPS_PORT_1: 16.02
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 44.1
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 04 00 00 80       	mov    eax,0x80000004
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 1254.5
- Reference cycles: 1215.47
- UOPS_EXECUTED.THREAD: 85.0
- RETIRE_SLOTS: 59.0
- UOPS_MITE: 3.0
- UOPS_MS: 153.9
- UOPS_PORT_0: 15.87
- UOPS_PORT_1: 16.03
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 5.0
- UOPS_PORT_4: 2.0
- UOPS_PORT_5: 44.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000005, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 05 00 00 80       	mov    eax,0x80000005
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 246.76
- Reference cycles: 239.3
- UOPS_EXECUTED.THREAD: 93.84
- RETIRE_SLOTS: 50.0
- UOPS_MITE: 2.0
- UOPS_MS: 168.43
- UOPS_PORT_0: 17.0
- UOPS_PORT_1: 17.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 47.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 05 00 00 80       	mov    eax,0x80000005
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 250.77
- Reference cycles: 243.2
- UOPS_EXECUTED.THREAD: 95.03
- RETIRE_SLOTS: 51.0
- UOPS_MITE: 3.0
- UOPS_MS: 173.03
- UOPS_PORT_0: 16.98
- UOPS_PORT_1: 16.92
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 49.18
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 05 00 00 80       	mov    eax,0x80000005
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 251.0
- Reference cycles: 244.27
- UOPS_EXECUTED.THREAD: 95.07
- RETIRE_SLOTS: 51.0
- UOPS_MITE: 3.0
- UOPS_MS: 173.17
- UOPS_PORT_0: 16.83
- UOPS_PORT_1: 17.07
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 49.1
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000006, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 06 00 00 80       	mov    eax,0x80000006
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 253.4
- Reference cycles: 245.73
- UOPS_EXECUTED.THREAD: 98.84
- RETIRE_SLOTS: 56.0
- UOPS_MITE: 2.0
- UOPS_MS: 173.43
- UOPS_PORT_0: 19.0
- UOPS_PORT_1: 17.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 50.53
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 06 00 00 80       	mov    eax,0x80000006
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 257.58
- Reference cycles: 250.13
- UOPS_EXECUTED.THREAD: 100.05
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 3.0
- UOPS_MS: 178.1
- UOPS_PORT_0: 18.88
- UOPS_PORT_1: 17.02
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 52.15
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 06 00 00 80       	mov    eax,0x80000006
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 257.65
- Reference cycles: 250.67
- UOPS_EXECUTED.THREAD: 100.03
- RETIRE_SLOTS: 57.0
- UOPS_MITE: 3.0
- UOPS_MS: 178.03
- UOPS_PORT_0: 18.87
- UOPS_PORT_1: 17.03
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 52.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000007, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 07 00 00 80       	mov    eax,0x80000007
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 252.47
- Reference cycles: 244.82
- UOPS_EXECUTED.THREAD: 96.84
- RETIRE_SLOTS: 54.0
- UOPS_MITE: 2.0
- UOPS_MS: 170.43
- UOPS_PORT_0: 17.91
- UOPS_PORT_1: 17.33
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 48.59
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 07 00 00 80       	mov    eax,0x80000007
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 256.5
- Reference cycles: 249.07
- UOPS_EXECUTED.THREAD: 98.05
- RETIRE_SLOTS: 55.0
- UOPS_MITE: 3.0
- UOPS_MS: 175.1
- UOPS_PORT_0: 17.87
- UOPS_PORT_1: 17.03
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 50.12
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 07 00 00 80       	mov    eax,0x80000007
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 256.38
- Reference cycles: 249.6
- UOPS_EXECUTED.THREAD: 98.02
- RETIRE_SLOTS: 55.0
- UOPS_MITE: 3.0
- UOPS_MS: 174.97
- UOPS_PORT_0: 17.88
- UOPS_PORT_1: 17.02
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 7.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 50.1
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000008, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 08 00 00 80       	mov    eax,0x80000008
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 257.41
- Reference cycles: 249.61
- UOPS_EXECUTED.THREAD: 99.94
- RETIRE_SLOTS: 64.0
- UOPS_MITE: 2.0
- UOPS_MS: 165.78
- UOPS_PORT_0: 19.0
- UOPS_PORT_1: 21.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 48.75
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 08 00 00 80       	mov    eax,0x80000008
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 261.53
- Reference cycles: 253.87
- UOPS_EXECUTED.THREAD: 101.02
- RETIRE_SLOTS: 65.0
- UOPS_MITE: 3.0
- UOPS_MS: 169.97
- UOPS_PORT_0: 18.88
- UOPS_PORT_1: 21.02
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 50.12
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 08 00 00 80       	mov    eax,0x80000008
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 261.45
- Reference cycles: 255.47
- UOPS_EXECUTED.THREAD: 101.05
- RETIRE_SLOTS: 65.0
- UOPS_MITE: 3.0
- UOPS_MS: 170.1
- UOPS_PORT_0: 18.9
- UOPS_PORT_1: 21.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 6.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 50.13
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With EAX=0x80000009, and ECX=0

With unroll_count=500 and no inner loop

Code:

   0:	b8 09 00 00 80       	mov    eax,0x80000009
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 3.0
- Core cycles: 297.49
- Reference cycles: 328.27
- UOPS_EXECUTED.THREAD: 142.84
- RETIRE_SLOTS: 80.0
- UOPS_MITE: 2.0
- UOPS_MS: 247.43
- UOPS_PORT_0: 31.0
- UOPS_PORT_1: 31.25
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 67.65
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.25

With loop_count=10 and unroll_count=1

Code:

   0:	b8 09 00 00 80       	mov    eax,0x80000009
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 301.25
- Reference cycles: 332.8
- UOPS_EXECUTED.THREAD: 144.05
- RETIRE_SLOTS: 81.0
- UOPS_MITE: 3.0
- UOPS_MS: 252.1
- UOPS_PORT_0: 30.87
- UOPS_PORT_1: 31.03
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 69.15
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

With loop_count=10 and unroll_count=1

Code:

   0:	b8 09 00 00 80       	mov    eax,0x80000009
   5:	b9 00 00 00 00       	mov    ecx,0x0
   a:	0f a2                	cpuid

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 301.63
- Reference cycles: 332.8
- UOPS_EXECUTED.THREAD: 144.05
- RETIRE_SLOTS: 81.0
- UOPS_MITE: 3.0
- UOPS_MS: 252.1
- UOPS_PORT_0: 30.87
- UOPS_PORT_1: 31.03
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 3.0
- UOPS_PORT_5: 69.17
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.8

CPUID - Throughput and Uops

With EAX=0x0, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x1, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x2, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x3, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x4, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x5, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x6, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x7, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x8, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x9, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0xa, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0xb, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0xc, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0xd, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0xe, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x80000000, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x80000001, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x80000002, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x80000003, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1

With loop_count=10 and unroll_count=1

With EAX=0x80000004, and ECX=0

With unroll_count=500 and no inner loop

With loop_count=10 and unroll_count=1