MOV (M32, R32)

With unroll_count=500 and no inner loop

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 0.5
- Reference cycles: 0.16
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 0.99
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 0.5
- Reference cycles: 0.17
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 0.5
- Reference cycles: 0.16
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 2.0
- Reference cycles: 0.67
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=2

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.01
- Reference cycles: 0.67
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.51
- UOPS_MITE: 0.01
- UOPS_MS: 0.01
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 2.0
- Reference cycles: 0.66
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.03
- UOPS_MS: 0.01
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 4.0
- Reference cycles: 1.34
- UOPS_EXECUTED.THREAD: 16.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=1

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 4.02
- Reference cycles: 1.34
- UOPS_EXECUTED.THREAD: 17.01
- RETIRE_SLOTS: 9.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 4.01
- Reference cycles: 1.31
- UOPS_EXECUTED.THREAD: 16.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.07
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d
  1f:	45 89 46 20          	mov    DWORD PTR [r14+0x20],r8d
  23:	45 89 46 24          	mov    DWORD PTR [r14+0x24],r8d
  27:	45 89 46 28          	mov    DWORD PTR [r14+0x28],r8d
  2b:	45 89 46 2c          	mov    DWORD PTR [r14+0x2c],r8d
  2f:	45 89 46 30          	mov    DWORD PTR [r14+0x30],r8d
  33:	45 89 46 34          	mov    DWORD PTR [r14+0x34],r8d
  37:	45 89 46 38          	mov    DWORD PTR [r14+0x38],r8d
  3b:	45 89 46 3c          	mov    DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 8.0
- Reference cycles: 2.69
- UOPS_EXECUTED.THREAD: 32.0
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 16.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.0
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 4.0

With loop_count=1000 and unroll_count=1

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d
  1f:	45 89 46 20          	mov    DWORD PTR [r14+0x20],r8d
  23:	45 89 46 24          	mov    DWORD PTR [r14+0x24],r8d
  27:	45 89 46 28          	mov    DWORD PTR [r14+0x28],r8d
  2b:	45 89 46 2c          	mov    DWORD PTR [r14+0x2c],r8d
  2f:	45 89 46 30          	mov    DWORD PTR [r14+0x30],r8d
  33:	45 89 46 34          	mov    DWORD PTR [r14+0x34],r8d
  37:	45 89 46 38          	mov    DWORD PTR [r14+0x38],r8d
  3b:	45 89 46 3c          	mov    DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 8.02
- Reference cycles: 2.66
- UOPS_EXECUTED.THREAD: 33.01
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.03
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.0
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	45 89 06             	mov    DWORD PTR [r14],r8d
   3:	45 89 46 04          	mov    DWORD PTR [r14+0x4],r8d
   7:	45 89 46 08          	mov    DWORD PTR [r14+0x8],r8d
   b:	45 89 46 0c          	mov    DWORD PTR [r14+0xc],r8d
   f:	45 89 46 10          	mov    DWORD PTR [r14+0x10],r8d
  13:	45 89 46 14          	mov    DWORD PTR [r14+0x14],r8d
  17:	45 89 46 18          	mov    DWORD PTR [r14+0x18],r8d
  1b:	45 89 46 1c          	mov    DWORD PTR [r14+0x1c],r8d
  1f:	45 89 46 20          	mov    DWORD PTR [r14+0x20],r8d
  23:	45 89 46 24          	mov    DWORD PTR [r14+0x24],r8d
  27:	45 89 46 28          	mov    DWORD PTR [r14+0x28],r8d
  2b:	45 89 46 2c          	mov    DWORD PTR [r14+0x2c],r8d
  2f:	45 89 46 30          	mov    DWORD PTR [r14+0x30],r8d
  33:	45 89 46 34          	mov    DWORD PTR [r14+0x34],r8d
  37:	45 89 46 38          	mov    DWORD PTR [r14+0x38],r8d
  3b:	45 89 46 3c          	mov    DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 8.01
- Reference cycles: 2.66
- UOPS_EXECUTED.THREAD: 32.1
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.14
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.0
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.04

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 0.5
- Reference cycles: 0.16
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 0.5
- Reference cycles: 0.17
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 0.5
- Reference cycles: 0.17
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 1.0
- UOPS_PORT_78: 1.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 2.0
- Reference cycles: 0.65
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=2

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.01
- Reference cycles: 0.67
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.01
- UOPS_MS: 0.01
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 2.01
- Reference cycles: 0.66
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.01
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 4.0
- UOPS_PORT_78: 4.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 4.0
- Reference cycles: 1.34
- UOPS_EXECUTED.THREAD: 16.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=1

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 4.02
- Reference cycles: 1.34
- UOPS_EXECUTED.THREAD: 17.01
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 0.0
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 4.01
- Reference cycles: 1.32
- UOPS_EXECUTED.THREAD: 16.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.09
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 8.0
- UOPS_PORT_78: 8.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d
  27:	47 89 44 2e 20       	mov    DWORD PTR [r14+r13*1+0x20],r8d
  2c:	47 89 44 2e 24       	mov    DWORD PTR [r14+r13*1+0x24],r8d
  31:	47 89 44 2e 28       	mov    DWORD PTR [r14+r13*1+0x28],r8d
  36:	47 89 44 2e 2c       	mov    DWORD PTR [r14+r13*1+0x2c],r8d
  3b:	47 89 44 2e 30       	mov    DWORD PTR [r14+r13*1+0x30],r8d
  40:	47 89 44 2e 34       	mov    DWORD PTR [r14+r13*1+0x34],r8d
  45:	47 89 44 2e 38       	mov    DWORD PTR [r14+r13*1+0x38],r8d
  4a:	47 89 44 2e 3c       	mov    DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 8.12
- Reference cycles: 2.95
- UOPS_EXECUTED.THREAD: 32.0
- RETIRE_SLOTS: 15.97
- UOPS_MITE: 15.99
- UOPS_MS: 0.24
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.0
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 4.0

With loop_count=1000 and unroll_count=1

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d
  27:	47 89 44 2e 20       	mov    DWORD PTR [r14+r13*1+0x20],r8d
  2c:	47 89 44 2e 24       	mov    DWORD PTR [r14+r13*1+0x24],r8d
  31:	47 89 44 2e 28       	mov    DWORD PTR [r14+r13*1+0x28],r8d
  36:	47 89 44 2e 2c       	mov    DWORD PTR [r14+r13*1+0x2c],r8d
  3b:	47 89 44 2e 30       	mov    DWORD PTR [r14+r13*1+0x30],r8d
  40:	47 89 44 2e 34       	mov    DWORD PTR [r14+r13*1+0x34],r8d
  45:	47 89 44 2e 38       	mov    DWORD PTR [r14+r13*1+0x38],r8d
  4a:	47 89 44 2e 3c       	mov    DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 8.06
- Reference cycles: 2.91
- UOPS_EXECUTED.THREAD: 33.02
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.04
- UOPS_MS: 0.03
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.01
- UOPS_PORT_78: 16.01
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	47 89 04 2e          	mov    DWORD PTR [r14+r13*1],r8d
   4:	47 89 44 2e 04       	mov    DWORD PTR [r14+r13*1+0x4],r8d
   9:	47 89 44 2e 08       	mov    DWORD PTR [r14+r13*1+0x8],r8d
   e:	47 89 44 2e 0c       	mov    DWORD PTR [r14+r13*1+0xc],r8d
  13:	47 89 44 2e 10       	mov    DWORD PTR [r14+r13*1+0x10],r8d
  18:	47 89 44 2e 14       	mov    DWORD PTR [r14+r13*1+0x14],r8d
  1d:	47 89 44 2e 18       	mov    DWORD PTR [r14+r13*1+0x18],r8d
  22:	47 89 44 2e 1c       	mov    DWORD PTR [r14+r13*1+0x1c],r8d
  27:	47 89 44 2e 20       	mov    DWORD PTR [r14+r13*1+0x20],r8d
  2c:	47 89 44 2e 24       	mov    DWORD PTR [r14+r13*1+0x24],r8d
  31:	47 89 44 2e 28       	mov    DWORD PTR [r14+r13*1+0x28],r8d
  36:	47 89 44 2e 2c       	mov    DWORD PTR [r14+r13*1+0x2c],r8d
  3b:	47 89 44 2e 30       	mov    DWORD PTR [r14+r13*1+0x30],r8d
  40:	47 89 44 2e 34       	mov    DWORD PTR [r14+r13*1+0x34],r8d
  45:	47 89 44 2e 38       	mov    DWORD PTR [r14+r13*1+0x38],r8d
  4a:	47 89 44 2e 3c       	mov    DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 8.06
- Reference cycles: 2.91
- UOPS_EXECUTED.THREAD: 32.1
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.17
- UOPS_MS: 0.02
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_23: 0.0
- UOPS_PORT_49: 16.0
- UOPS_PORT_78: 16.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

MOV (M32, R32) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10