ADD (R64, 0)

With unroll_count=500 and no inner loop

Code:

   0:	49 83 c0 00          	add    r8,0x0

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.7
- UOPS_RETIRED.ANY: 1.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	49 83 c0 00          	add    r8,0x0

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.06
- Reference cycles: 0.69
- UOPS_RETIRED.ANY: 1.2
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	49 83 c0 00          	add    r8,0x0

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.01
- Reference cycles: 0.66
- UOPS_RETIRED.ANY: 1.02
- UOPS_MS: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 1.33
- Reference cycles: 0.98
- UOPS_RETIRED.ANY: 4.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.01
- Reference cycles: 1.33
- UOPS_RETIRED.ANY: 5.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 1.51
- Reference cycles: 0.99
- UOPS_RETIRED.ANY: 4.1
- UOPS_MS: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 2.66
- Reference cycles: 1.95
- UOPS_RETIRED.ANY: 8.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 4.01
- Reference cycles: 2.61
- UOPS_RETIRED.ANY: 10.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 2.81
- Reference cycles: 1.85
- UOPS_RETIRED.ANY: 8.2
- UOPS_MS: 0.0

With 13 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0
  20:	48 83 c1 00          	add    rcx,0x0
  24:	48 83 c2 00          	add    rdx,0x0
  28:	48 83 c7 00          	add    rdi,0x0
  2c:	48 83 c6 00          	add    rsi,0x0
  30:	48 83 c5 00          	add    rbp,0x0

Show nanoBench command
Results:
- Instructions retired: 13.0
- Core cycles: 4.34
- Reference cycles: 2.73
- UOPS_RETIRED.ANY: 13.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0
  20:	48 83 c1 00          	add    rcx,0x0
  24:	48 83 c2 00          	add    rdx,0x0
  28:	48 83 c7 00          	add    rdi,0x0
  2c:	48 83 c6 00          	add    rsi,0x0
  30:	48 83 c5 00          	add    rbp,0x0

Show nanoBench command
Results:
- Instructions retired: 15.0
- Core cycles: 6.0
- Reference cycles: 3.9
- UOPS_RETIRED.ANY: 15.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	49 83 c0 00          	add    r8,0x0
   4:	49 83 c1 00          	add    r9,0x0
   8:	49 83 c2 00          	add    r10,0x0
   c:	49 83 c3 00          	add    r11,0x0
  10:	49 83 c4 00          	add    r12,0x0
  14:	49 83 c5 00          	add    r13,0x0
  18:	49 83 c6 00          	add    r14,0x0
  1c:	48 83 c3 00          	add    rbx,0x0
  20:	48 83 c1 00          	add    rcx,0x0
  24:	48 83 c2 00          	add    rdx,0x0
  28:	48 83 c7 00          	add    rdi,0x0
  2c:	48 83 c6 00          	add    rsi,0x0
  30:	48 83 c5 00          	add    rbp,0x0

Show nanoBench command
Results:
- Instructions retired: 13.2
- Core cycles: 4.47
- Reference cycles: 2.94
- UOPS_RETIRED.ANY: 13.2
- UOPS_MS: 0.0

ADD (R64, 0) - Throughput and Uops

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 13 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10