VPMULUDQ (YMM, YMM, YMM)

With unroll_count=500 and no inner loop

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 0.5
- Reference cycles: 0.37
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 0.5
- Reference cycles: 0.34
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 0.5
- Reference cycles: 0.35
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 2.0
- Reference cycles: 1.38
- UOPS_EXECUTED.THREAD: 4.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 2.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=2

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.01
- Reference cycles: 1.38
- UOPS_EXECUTED.THREAD: 4.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 2.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 2.01
- Reference cycles: 1.4
- UOPS_EXECUTED.THREAD: 4.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 2.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 4.0
- Reference cycles: 2.91
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 4.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=1

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 4.01
- Reference cycles: 2.81
- UOPS_EXECUTED.THREAD: 9.0
- RETIRE_SLOTS: 9.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 4.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 4.01
- Reference cycles: 2.79
- UOPS_EXECUTED.THREAD: 8.1
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 4.0
- UOPS_PORT_1: 4.0
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 11 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2
  20:	c5 75 f4 d2          	vpmuludq ymm10,ymm1,ymm2
  24:	c5 75 f4 da          	vpmuludq ymm11,ymm1,ymm2
  28:	c5 75 f4 e2          	vpmuludq ymm12,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 11.0
- Core cycles: 5.5
- Reference cycles: 3.68
- UOPS_EXECUTED.THREAD: 11.0
- RETIRE_SLOTS: 11.0
- UOPS_MITE: 11.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 5.5
- UOPS_PORT_1: 5.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.75

With loop_count=1000 and unroll_count=1

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2
  20:	c5 75 f4 d2          	vpmuludq ymm10,ymm1,ymm2
  24:	c5 75 f4 da          	vpmuludq ymm11,ymm1,ymm2
  28:	c5 75 f4 e2          	vpmuludq ymm12,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 13.0
- Core cycles: 5.51
- Reference cycles: 3.91
- UOPS_EXECUTED.THREAD: 12.0
- RETIRE_SLOTS: 12.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 5.5
- UOPS_PORT_1: 5.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	c5 f5 f4 c2          	vpmuludq ymm0,ymm1,ymm2
   4:	c5 f5 f4 da          	vpmuludq ymm3,ymm1,ymm2
   8:	c5 f5 f4 e2          	vpmuludq ymm4,ymm1,ymm2
   c:	c5 f5 f4 ea          	vpmuludq ymm5,ymm1,ymm2
  10:	c5 f5 f4 f2          	vpmuludq ymm6,ymm1,ymm2
  14:	c5 f5 f4 fa          	vpmuludq ymm7,ymm1,ymm2
  18:	c5 75 f4 c2          	vpmuludq ymm8,ymm1,ymm2
  1c:	c5 75 f4 ca          	vpmuludq ymm9,ymm1,ymm2
  20:	c5 75 f4 d2          	vpmuludq ymm10,ymm1,ymm2
  24:	c5 75 f4 da          	vpmuludq ymm11,ymm1,ymm2
  28:	c5 75 f4 e2          	vpmuludq ymm12,ymm1,ymm2

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM1, YMM1, YMM1;
VXORPS YMM2, YMM2, YMM2

Show nanoBench command
Results:
- Instructions retired: 11.2
- Core cycles: 5.51
- Reference cycles: 3.91
- UOPS_EXECUTED.THREAD: 11.1
- RETIRE_SLOTS: 11.1
- UOPS_MITE: 0.11
- UOPS_MS: 0.0
- UOPS_PORT_0: 5.5
- UOPS_PORT_1: 5.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With the same register for for different operands

With unroll_count=500 and no inner loop

Code:

   0:	c5 fd f4 c0          	vpmuludq ymm0,ymm0,ymm0

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM0, YMM0, YMM0

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 5.0
- Reference cycles: 3.74
- UOPS_EXECUTED.THREAD: 1.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	c5 fd f4 c0          	vpmuludq ymm0,ymm0,ymm0

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM0, YMM0, YMM0

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 5.0
- Reference cycles: 3.57
- UOPS_EXECUTED.THREAD: 1.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	c5 fd f4 c0          	vpmuludq ymm0,ymm0,ymm0

Init:

MOV R15, 10000;
L: VADDPS YMM0, YMM1, YMM1;
VADDPS YMM0, YMM1, YMM1;
DEC R15;
JNZ L;
VZEROALL;
VXORPS YMM0, YMM0, YMM0

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 5.0
- Reference cycles: 3.57
- UOPS_EXECUTED.THREAD: 1.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.5
- UOPS_PORT_1: 0.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

VPMULUDQ (YMM, YMM, YMM) - Throughput and Uops

With different registers for different operands

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 11 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With the same register for for different operands

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100