RDTSC - Throughput and Uops

With unroll_count=500 and no inner loop

Code:
```
   0:	0f 31                	rdtsc  
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 24.0
- Reference cycles: 25.25
- UOPS_EXECUTED.THREAD: 13.0
- RETIRE_SLOTS: 13.0
- UOPS_MITE: 0.0
- UOPS_MS: 13.0
- UOPS_PORT_0: 2.25
- UOPS_PORT_1: 3.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.0
- UOPS_PORT_6: 5.25
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With unroll_count=500, no inner loop, and 1 NOP

Code:

   0:	0f 31                	rdtsc  
   2:	90                   	nop

Show nanoBench command
Results:
- Instructions retired: 2.0
- Core cycles: 24.0
- Reference cycles: 25.25
- UOPS_EXECUTED.THREAD: 13.0
- RETIRE_SLOTS: 14.0
- UOPS_MITE: 1.0
- UOPS_MS: 13.0
- UOPS_PORT_0: 2.0
- UOPS_PORT_1: 3.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.0
- UOPS_PORT_6: 5.5
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=10

Code:
```
   0:	0f 31                	rdtsc  
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 24.0
- Reference cycles: 25.26
- UOPS_EXECUTED.THREAD: 13.1
- RETIRE_SLOTS: 13.1
- UOPS_MITE: 0.1
- UOPS_MS: 13.01
- UOPS_PORT_0: 2.25
- UOPS_PORT_1: 3.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.0
- UOPS_PORT_6: 5.35
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.1

With loop_count=100 and unroll_count=100

Code:
```
   0:	0f 31                	rdtsc  
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 24.0
- Reference cycles: 25.26
- UOPS_EXECUTED.THREAD: 13.01
- RETIRE_SLOTS: 13.01
- UOPS_MITE: 0.01
- UOPS_MS: 13.01
- UOPS_PORT_0: 2.25
- UOPS_PORT_1: 3.5
- UOPS_PORT_2: 0.0
- UOPS_PORT_3: 0.0
- UOPS_PORT_4: 0.0
- UOPS_PORT_5: 2.0
- UOPS_PORT_6: 5.26
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01