MOV (M32, I32)

With unroll_count=500 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.02
- Reference cycles: 1.08
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.33
- UOPS_PORT_3: 0.33
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.26

With loop_count=1000 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.01
- Reference cycles: 1.06
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.3
- UOPS_PORT_3: 0.3
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.4
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.01
- Reference cycles: 1.06
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.3
- UOPS_PORT_3: 0.3
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.4
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.33
- UOPS_PORT_3: 0.33
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.33
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.33
- UOPS_PORT_3: 0.33
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.33
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 4.23
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 1.34
- UOPS_PORT_3: 1.34
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 1.33
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=2

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 1.33
- UOPS_PORT_3: 1.33
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_7: 1.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=2, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 1.33
- UOPS_PORT_3: 1.33
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_7: 1.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 1.34
- UOPS_PORT_3: 1.34
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_7: 1.33
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100, unroll_count=20, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 1.34
- UOPS_PORT_3: 1.34
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_7: 1.33
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.0
- Reference cycles: 8.4
- UOPS_EXECUTED.THREAD: 16.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.67
- UOPS_PORT_3: 2.67
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 2.66
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 8.43
- UOPS_EXECUTED.THREAD: 17.03
- RETIRE_SLOTS: 9.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.01
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.67
- UOPS_PORT_3: 2.66
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 2.67
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01 
  23:	40                   	rex
  24:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  2b:	01 
  2c:	40                   	rex
  2d:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  34:	01 
  35:	40                   	rex
  36:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  3d:	01 
  3e:	40                   	rex
  3f:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  46:	01

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 8.43
- UOPS_EXECUTED.THREAD: 17.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.66
- UOPS_PORT_3: 2.67
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 2.67
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.01
- Reference cycles: 8.44
- UOPS_EXECUTED.THREAD: 16.11
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.68
- UOPS_PORT_3: 2.68
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 2.65
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01 
  23:	40                   	rex
  24:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  2b:	01 
  2c:	40                   	rex
  2d:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  34:	01 
  35:	40                   	rex
  36:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  3d:	01 
  3e:	40                   	rex
  3f:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  46:	01

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.07
- Reference cycles: 8.5
- UOPS_EXECUTED.THREAD: 16.11
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.42
- UOPS_PORT_3: 2.44
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 3.15
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.0
- Reference cycles: 16.87
- UOPS_EXECUTED.THREAD: 32.0
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 16.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 5.33
- UOPS_PORT_3: 5.33
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 5.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 4.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 33.0
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 5.33
- UOPS_PORT_3: 5.34
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 5.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01 
  23:	40                   	rex
  24:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  2b:	01 
  2c:	40                   	rex
  2d:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  34:	01 
  35:	40                   	rex
  36:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  3d:	01 
  3e:	40                   	rex
  3f:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  46:	01 
  47:	40                   	rex
  48:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  4f:	01 
  50:	40                   	rex
  51:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  58:	01 
  59:	40                   	rex
  5a:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  61:	01 
  62:	40                   	rex
  63:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  6a:	01 
  6b:	40                   	rex
  6c:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  73:	01 
  74:	40                   	rex
  75:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  7c:	01 
  7d:	40                   	rex
  7e:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  85:	01 
  86:	40                   	rex
  87:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  8e:	01

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 16.85
- UOPS_EXECUTED.THREAD: 33.0
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 5.33
- UOPS_PORT_3: 5.34
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 5.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   7:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
   e:	01 
   f:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  16:	01 
  17:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  1e:	01 
  1f:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  26:	01 
  27:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  2e:	01 
  2f:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  36:	01 
  37:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  3e:	01 
  3f:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  46:	01 
  47:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  4e:	01 
  4f:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  56:	01 
  57:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  5e:	01 
  5f:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  66:	01 
  67:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  6e:	01 
  6f:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  76:	01 
  77:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  7e:	01

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 32.11
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.16
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 5.33
- UOPS_PORT_3: 5.34
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 5.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	41 c7 06 00 00 00 01 	mov    DWORD PTR [r14],0x1000000
   8:	40                   	rex
   9:	41 c7 46 04 00 00 00 	mov    DWORD PTR [r14+0x4],0x1000000
  10:	01 
  11:	40                   	rex
  12:	41 c7 46 08 00 00 00 	mov    DWORD PTR [r14+0x8],0x1000000
  19:	01 
  1a:	40                   	rex
  1b:	41 c7 46 0c 00 00 00 	mov    DWORD PTR [r14+0xc],0x1000000
  22:	01 
  23:	40                   	rex
  24:	41 c7 46 10 00 00 00 	mov    DWORD PTR [r14+0x10],0x1000000
  2b:	01 
  2c:	40                   	rex
  2d:	41 c7 46 14 00 00 00 	mov    DWORD PTR [r14+0x14],0x1000000
  34:	01 
  35:	40                   	rex
  36:	41 c7 46 18 00 00 00 	mov    DWORD PTR [r14+0x18],0x1000000
  3d:	01 
  3e:	40                   	rex
  3f:	41 c7 46 1c 00 00 00 	mov    DWORD PTR [r14+0x1c],0x1000000
  46:	01 
  47:	40                   	rex
  48:	41 c7 46 20 00 00 00 	mov    DWORD PTR [r14+0x20],0x1000000
  4f:	01 
  50:	40                   	rex
  51:	41 c7 46 24 00 00 00 	mov    DWORD PTR [r14+0x24],0x1000000
  58:	01 
  59:	40                   	rex
  5a:	41 c7 46 28 00 00 00 	mov    DWORD PTR [r14+0x28],0x1000000
  61:	01 
  62:	40                   	rex
  63:	41 c7 46 2c 00 00 00 	mov    DWORD PTR [r14+0x2c],0x1000000
  6a:	01 
  6b:	40                   	rex
  6c:	41 c7 46 30 00 00 00 	mov    DWORD PTR [r14+0x30],0x1000000
  73:	01 
  74:	40                   	rex
  75:	41 c7 46 34 00 00 00 	mov    DWORD PTR [r14+0x34],0x1000000
  7c:	01 
  7d:	40                   	rex
  7e:	41 c7 46 38 00 00 00 	mov    DWORD PTR [r14+0x38],0x1000000
  85:	01 
  86:	40                   	rex
  87:	41 c7 46 3c 00 00 00 	mov    DWORD PTR [r14+0x3c],0x1000000
  8e:	01

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 32.11
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.16
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 5.33
- UOPS_PORT_3: 5.34
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 5.34
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.0
- RETIRE_SLOTS: 1.0
- UOPS_MITE: 1.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.5
- UOPS_PORT_3: 0.5
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.25

With loop_count=1000 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.5
- UOPS_PORT_3: 0.5
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.1
- RETIRE_SLOTS: 1.1
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.5
- UOPS_PORT_3: 0.5
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 1.05
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.5
- UOPS_PORT_3: 0.5
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.01
- Reference cycles: 1.06
- UOPS_EXECUTED.THREAD: 2.01
- RETIRE_SLOTS: 1.01
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 0.46
- UOPS_PORT_3: 0.54
- UOPS_PORT_4: 1.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.01
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 4.2
- UOPS_EXECUTED.THREAD: 8.0
- RETIRE_SLOTS: 4.0
- UOPS_MITE: 4.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 2.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 1.0

With loop_count=1000 and unroll_count=2

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 2.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=2, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.5
- RETIRE_SLOTS: 4.5
- UOPS_MITE: 0.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 2.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.5
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 2.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100, unroll_count=20, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.01
- Reference cycles: 4.22
- UOPS_EXECUTED.THREAD: 8.05
- RETIRE_SLOTS: 4.05
- UOPS_MITE: 0.04
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 2.0
- UOPS_PORT_3: 2.0
- UOPS_PORT_4: 4.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.05
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.0
- Reference cycles: 8.43
- UOPS_EXECUTED.THREAD: 16.0
- RETIRE_SLOTS: 8.0
- UOPS_MITE: 8.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 2.0

With loop_count=1000 and unroll_count=1

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 8.44
- UOPS_EXECUTED.THREAD: 17.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01 
  27:	40                   	rex
  28:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2f:	00 01 
  31:	40                   	rex
  32:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  39:	00 01 
  3b:	40                   	rex
  3c:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  43:	00 01 
  45:	40                   	rex
  46:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  4d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.01
- Reference cycles: 8.43
- UOPS_EXECUTED.THREAD: 17.0
- RETIRE_SLOTS: 9.0
- UOPS_MITE: 0.01
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.07
- Reference cycles: 8.5
- UOPS_EXECUTED.THREAD: 16.11
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 3.65
- UOPS_PORT_3: 4.36
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.02

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01 
  27:	40                   	rex
  28:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2f:	00 01 
  31:	40                   	rex
  32:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  39:	00 01 
  3b:	40                   	rex
  3c:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  43:	00 01 
  45:	40                   	rex
  46:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  4d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.01
- Reference cycles: 8.44
- UOPS_EXECUTED.THREAD: 16.11
- RETIRE_SLOTS: 8.1
- UOPS_MITE: 0.08
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 4.0
- UOPS_PORT_3: 4.0
- UOPS_PORT_4: 8.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.03

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.0
- Reference cycles: 16.8
- UOPS_EXECUTED.THREAD: 32.0
- RETIRE_SLOTS: 16.0
- UOPS_MITE: 16.0
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 8.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 4.0

With loop_count=1000 and unroll_count=1

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 33.0
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 8.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01 
  27:	40                   	rex
  28:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2f:	00 01 
  31:	40                   	rex
  32:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  39:	00 01 
  3b:	40                   	rex
  3c:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  43:	00 01 
  45:	40                   	rex
  46:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  4d:	00 01 
  4f:	40                   	rex
  50:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  57:	00 01 
  59:	40                   	rex
  5a:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  61:	00 01 
  63:	40                   	rex
  64:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  6b:	00 01 
  6d:	40                   	rex
  6e:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  75:	00 01 
  77:	40                   	rex
  78:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  7f:	00 01 
  81:	40                   	rex
  82:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  89:	00 01 
  8b:	40                   	rex
  8c:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  93:	00 01 
  95:	40                   	rex
  96:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  9d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 16.01
- Reference cycles: 16.85
- UOPS_EXECUTED.THREAD: 33.0
- RETIRE_SLOTS: 17.0
- UOPS_MITE: 0.02
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 8.0
- UOPS_PORT_3: 8.01
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 1.0
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.01

With loop_count=100 and unroll_count=10

Code:

   0:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   7:	01 
   8:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
   f:	00 01 
  11:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  18:	00 01 
  1a:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  21:	00 01 
  23:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2a:	00 01 
  2c:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  33:	00 01 
  35:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  3c:	00 01 
  3e:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  45:	00 01 
  47:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  4e:	00 01 
  50:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  57:	00 01 
  59:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  60:	00 01 
  62:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  69:	00 01 
  6b:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  72:	00 01 
  74:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  7b:	00 01 
  7d:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  84:	00 01 
  86:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  8d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 32.11
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.16
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 8.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

Code:

   0:	40                   	rex
   1:	43 c7 04 2e 00 00 00 	mov    DWORD PTR [r14+r13*1],0x1000000
   8:	01 
   9:	40                   	rex
   a:	43 c7 44 2e 04 00 00 	mov    DWORD PTR [r14+r13*1+0x4],0x1000000
  11:	00 01 
  13:	40                   	rex
  14:	43 c7 44 2e 08 00 00 	mov    DWORD PTR [r14+r13*1+0x8],0x1000000
  1b:	00 01 
  1d:	40                   	rex
  1e:	43 c7 44 2e 0c 00 00 	mov    DWORD PTR [r14+r13*1+0xc],0x1000000
  25:	00 01 
  27:	40                   	rex
  28:	43 c7 44 2e 10 00 00 	mov    DWORD PTR [r14+r13*1+0x10],0x1000000
  2f:	00 01 
  31:	40                   	rex
  32:	43 c7 44 2e 14 00 00 	mov    DWORD PTR [r14+r13*1+0x14],0x1000000
  39:	00 01 
  3b:	40                   	rex
  3c:	43 c7 44 2e 18 00 00 	mov    DWORD PTR [r14+r13*1+0x18],0x1000000
  43:	00 01 
  45:	40                   	rex
  46:	43 c7 44 2e 1c 00 00 	mov    DWORD PTR [r14+r13*1+0x1c],0x1000000
  4d:	00 01 
  4f:	40                   	rex
  50:	43 c7 44 2e 20 00 00 	mov    DWORD PTR [r14+r13*1+0x20],0x1000000
  57:	00 01 
  59:	40                   	rex
  5a:	43 c7 44 2e 24 00 00 	mov    DWORD PTR [r14+r13*1+0x24],0x1000000
  61:	00 01 
  63:	40                   	rex
  64:	43 c7 44 2e 28 00 00 	mov    DWORD PTR [r14+r13*1+0x28],0x1000000
  6b:	00 01 
  6d:	40                   	rex
  6e:	43 c7 44 2e 2c 00 00 	mov    DWORD PTR [r14+r13*1+0x2c],0x1000000
  75:	00 01 
  77:	40                   	rex
  78:	43 c7 44 2e 30 00 00 	mov    DWORD PTR [r14+r13*1+0x30],0x1000000
  7f:	00 01 
  81:	40                   	rex
  82:	43 c7 44 2e 34 00 00 	mov    DWORD PTR [r14+r13*1+0x34],0x1000000
  89:	00 01 
  8b:	40                   	rex
  8c:	43 c7 44 2e 38 00 00 	mov    DWORD PTR [r14+r13*1+0x38],0x1000000
  93:	00 01 
  95:	40                   	rex
  96:	43 c7 44 2e 3c 00 00 	mov    DWORD PTR [r14+r13*1+0x3c],0x1000000
  9d:	00 01

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.01
- Reference cycles: 16.86
- UOPS_EXECUTED.THREAD: 32.11
- RETIRE_SLOTS: 16.1
- UOPS_MITE: 0.16
- UOPS_MS: 0.0
- UOPS_PORT_0: 0.0
- UOPS_PORT_1: 0.0
- UOPS_PORT_2: 8.0
- UOPS_PORT_3: 8.0
- UOPS_PORT_4: 16.0
- UOPS_PORT_5: 0.0
- UOPS_PORT_6: 0.1
- UOPS_PORT_7: 0.0
- DIV_CYCLES: 0.0
- ILD_STALL.LCP: 0.0
- UOPS_MITE>=1: 0.05

MOV (M32, I32) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

With loop_count=100 and unroll_count=100

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=1000, unroll_count=2, and padding (redundant prefixes)

With loop_count=100 and unroll_count=20

With loop_count=100, unroll_count=20, and padding (redundant prefixes)

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

With loop_count=100 and unroll_count=10

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

With loop_count=100 and unroll_count=10

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=1000, unroll_count=10, and padding (redundant prefixes)

With loop_count=100 and unroll_count=100

With loop_count=100, unroll_count=100, and padding (redundant prefixes)

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=1000, unroll_count=2, and padding (redundant prefixes)

With loop_count=100 and unroll_count=20

With loop_count=100, unroll_count=20, and padding (redundant prefixes)

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

With loop_count=100 and unroll_count=10

With loop_count=100, unroll_count=10, and padding (redundant prefixes)

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=1000, unroll_count=1, and padding (redundant prefixes)

With loop_count=100 and unroll_count=10

With loop_count=100, unroll_count=10, and padding (redundant prefixes)