MOVBE (M32, R32)

With unroll_count=500 and no inner loop

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.5
- UOPS_RETIRED.ALL: 1.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.2
- Reference cycles: 0.6
- UOPS_RETIRED.ALL: 1.2
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.02
- Reference cycles: 0.51
- UOPS_RETIRED.ALL: 1.02
- UOPS_MS: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.0
- Reference cycles: 2.0
- UOPS_RETIRED.ALL: 4.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 5.01
- Reference cycles: 2.51
- UOPS_RETIRED.ALL: 5.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.11
- Reference cycles: 2.05
- UOPS_RETIRED.ALL: 4.1
- UOPS_MS: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.0
- Reference cycles: 4.03
- UOPS_RETIRED.ALL: 8.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 10.02
- Reference cycles: 5.02
- UOPS_RETIRED.ALL: 10.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.22
- Reference cycles: 4.11
- UOPS_RETIRED.ALL: 8.2
- UOPS_MS: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d
  2f:	45 0f 38 f1 46 20    	movbe  DWORD PTR [r14+0x20],r8d
  35:	45 0f 38 f1 46 24    	movbe  DWORD PTR [r14+0x24],r8d
  3b:	45 0f 38 f1 46 28    	movbe  DWORD PTR [r14+0x28],r8d
  41:	45 0f 38 f1 46 2c    	movbe  DWORD PTR [r14+0x2c],r8d
  47:	45 0f 38 f1 46 30    	movbe  DWORD PTR [r14+0x30],r8d
  4d:	45 0f 38 f1 46 34    	movbe  DWORD PTR [r14+0x34],r8d
  53:	45 0f 38 f1 46 38    	movbe  DWORD PTR [r14+0x38],r8d
  59:	45 0f 38 f1 46 3c    	movbe  DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.0
- Reference cycles: 7.93
- UOPS_RETIRED.ALL: 16.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d
  2f:	45 0f 38 f1 46 20    	movbe  DWORD PTR [r14+0x20],r8d
  35:	45 0f 38 f1 46 24    	movbe  DWORD PTR [r14+0x24],r8d
  3b:	45 0f 38 f1 46 28    	movbe  DWORD PTR [r14+0x28],r8d
  41:	45 0f 38 f1 46 2c    	movbe  DWORD PTR [r14+0x2c],r8d
  47:	45 0f 38 f1 46 30    	movbe  DWORD PTR [r14+0x30],r8d
  4d:	45 0f 38 f1 46 34    	movbe  DWORD PTR [r14+0x34],r8d
  53:	45 0f 38 f1 46 38    	movbe  DWORD PTR [r14+0x38],r8d
  59:	45 0f 38 f1 46 3c    	movbe  DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 18.02
- Reference cycles: 9.02
- UOPS_RETIRED.ALL: 18.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	45 0f 38 f1 06       	movbe  DWORD PTR [r14],r8d
   5:	45 0f 38 f1 46 04    	movbe  DWORD PTR [r14+0x4],r8d
   b:	45 0f 38 f1 46 08    	movbe  DWORD PTR [r14+0x8],r8d
  11:	45 0f 38 f1 46 0c    	movbe  DWORD PTR [r14+0xc],r8d
  17:	45 0f 38 f1 46 10    	movbe  DWORD PTR [r14+0x10],r8d
  1d:	45 0f 38 f1 46 14    	movbe  DWORD PTR [r14+0x14],r8d
  23:	45 0f 38 f1 46 18    	movbe  DWORD PTR [r14+0x18],r8d
  29:	45 0f 38 f1 46 1c    	movbe  DWORD PTR [r14+0x1c],r8d
  2f:	45 0f 38 f1 46 20    	movbe  DWORD PTR [r14+0x20],r8d
  35:	45 0f 38 f1 46 24    	movbe  DWORD PTR [r14+0x24],r8d
  3b:	45 0f 38 f1 46 28    	movbe  DWORD PTR [r14+0x28],r8d
  41:	45 0f 38 f1 46 2c    	movbe  DWORD PTR [r14+0x2c],r8d
  47:	45 0f 38 f1 46 30    	movbe  DWORD PTR [r14+0x30],r8d
  4d:	45 0f 38 f1 46 34    	movbe  DWORD PTR [r14+0x34],r8d
  53:	45 0f 38 f1 46 38    	movbe  DWORD PTR [r14+0x38],r8d
  59:	45 0f 38 f1 46 3c    	movbe  DWORD PTR [r14+0x3c],r8d

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.22
- Reference cycles: 8.11
- UOPS_RETIRED.ALL: 16.2
- UOPS_MS: 0.0

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 0.49
- UOPS_RETIRED.ALL: 1.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.2
- Reference cycles: 0.6
- UOPS_RETIRED.ALL: 1.2
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.02
- Reference cycles: 0.51
- UOPS_RETIRED.ALL: 1.02
- UOPS_MS: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 4.02
- Reference cycles: 2.02
- UOPS_RETIRED.ALL: 4.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 5.01
- Reference cycles: 2.5
- UOPS_RETIRED.ALL: 5.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 4.11
- Reference cycles: 2.06
- UOPS_RETIRED.ALL: 4.1
- UOPS_MS: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 8.0
- Reference cycles: 3.99
- UOPS_RETIRED.ALL: 8.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 10.02
- Reference cycles: 5.01
- UOPS_RETIRED.ALL: 10.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.22
- Reference cycles: 4.11
- UOPS_RETIRED.ALL: 8.2
- UOPS_MS: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d
  37:	47 0f 38 f1 44 2e 20 	movbe  DWORD PTR [r14+r13*1+0x20],r8d
  3e:	47 0f 38 f1 44 2e 24 	movbe  DWORD PTR [r14+r13*1+0x24],r8d
  45:	47 0f 38 f1 44 2e 28 	movbe  DWORD PTR [r14+r13*1+0x28],r8d
  4c:	47 0f 38 f1 44 2e 2c 	movbe  DWORD PTR [r14+r13*1+0x2c],r8d
  53:	47 0f 38 f1 44 2e 30 	movbe  DWORD PTR [r14+r13*1+0x30],r8d
  5a:	47 0f 38 f1 44 2e 34 	movbe  DWORD PTR [r14+r13*1+0x34],r8d
  61:	47 0f 38 f1 44 2e 38 	movbe  DWORD PTR [r14+r13*1+0x38],r8d
  68:	47 0f 38 f1 44 2e 3c 	movbe  DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 16.0
- Reference cycles: 8.04
- UOPS_RETIRED.ALL: 16.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d
  37:	47 0f 38 f1 44 2e 20 	movbe  DWORD PTR [r14+r13*1+0x20],r8d
  3e:	47 0f 38 f1 44 2e 24 	movbe  DWORD PTR [r14+r13*1+0x24],r8d
  45:	47 0f 38 f1 44 2e 28 	movbe  DWORD PTR [r14+r13*1+0x28],r8d
  4c:	47 0f 38 f1 44 2e 2c 	movbe  DWORD PTR [r14+r13*1+0x2c],r8d
  53:	47 0f 38 f1 44 2e 30 	movbe  DWORD PTR [r14+r13*1+0x30],r8d
  5a:	47 0f 38 f1 44 2e 34 	movbe  DWORD PTR [r14+r13*1+0x34],r8d
  61:	47 0f 38 f1 44 2e 38 	movbe  DWORD PTR [r14+r13*1+0x38],r8d
  68:	47 0f 38 f1 44 2e 3c 	movbe  DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 18.02
- Reference cycles: 9.01
- UOPS_RETIRED.ALL: 18.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	47 0f 38 f1 04 2e    	movbe  DWORD PTR [r14+r13*1],r8d
   6:	47 0f 38 f1 44 2e 04 	movbe  DWORD PTR [r14+r13*1+0x4],r8d
   d:	47 0f 38 f1 44 2e 08 	movbe  DWORD PTR [r14+r13*1+0x8],r8d
  14:	47 0f 38 f1 44 2e 0c 	movbe  DWORD PTR [r14+r13*1+0xc],r8d
  1b:	47 0f 38 f1 44 2e 10 	movbe  DWORD PTR [r14+r13*1+0x10],r8d
  22:	47 0f 38 f1 44 2e 14 	movbe  DWORD PTR [r14+r13*1+0x14],r8d
  29:	47 0f 38 f1 44 2e 18 	movbe  DWORD PTR [r14+r13*1+0x18],r8d
  30:	47 0f 38 f1 44 2e 1c 	movbe  DWORD PTR [r14+r13*1+0x1c],r8d
  37:	47 0f 38 f1 44 2e 20 	movbe  DWORD PTR [r14+r13*1+0x20],r8d
  3e:	47 0f 38 f1 44 2e 24 	movbe  DWORD PTR [r14+r13*1+0x24],r8d
  45:	47 0f 38 f1 44 2e 28 	movbe  DWORD PTR [r14+r13*1+0x28],r8d
  4c:	47 0f 38 f1 44 2e 2c 	movbe  DWORD PTR [r14+r13*1+0x2c],r8d
  53:	47 0f 38 f1 44 2e 30 	movbe  DWORD PTR [r14+r13*1+0x30],r8d
  5a:	47 0f 38 f1 44 2e 34 	movbe  DWORD PTR [r14+r13*1+0x34],r8d
  61:	47 0f 38 f1 44 2e 38 	movbe  DWORD PTR [r14+r13*1+0x38],r8d
  68:	47 0f 38 f1 44 2e 3c 	movbe  DWORD PTR [r14+r13*1+0x3c],r8d

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 16.22
- Reference cycles: 8.11
- UOPS_RETIRED.ALL: 16.2
- UOPS_MS: 0.0

MOVBE (M32, R32) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10