ADD (M8, 0)

With unroll_count=500 and no inner loop

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0

Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 1.0
- Reference cycles: 1.02
- UOPS_RETIRED.ALL: 1.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0

Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 1.01
- Reference cycles: 1.03
- UOPS_RETIRED.ALL: 1.2
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0

Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 1.0
- Reference cycles: 1.03
- UOPS_RETIRED.ALL: 1.02
- UOPS_MS: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0

Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 5.45
- Reference cycles: 5.52
- UOPS_RETIRED.ALL: 4.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0

Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 2.01
- Reference cycles: 2.06
- UOPS_RETIRED.ALL: 5.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0

Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 2.92
- Reference cycles: 2.99
- UOPS_RETIRED.ALL: 4.1
- UOPS_MS: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0

Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 7.9
- Reference cycles: 8.0
- UOPS_RETIRED.ALL: 8.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0

Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 4.03
- Reference cycles: 4.13
- UOPS_RETIRED.ALL: 10.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0

Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 6.43
- Reference cycles: 6.56
- UOPS_RETIRED.ALL: 8.2
- UOPS_MS: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0
  27:	41 80 46 08 00       	add    BYTE PTR [r14+0x8],0x0
  2c:	41 80 46 09 00       	add    BYTE PTR [r14+0x9],0x0
  31:	41 80 46 0a 00       	add    BYTE PTR [r14+0xa],0x0
  36:	41 80 46 0b 00       	add    BYTE PTR [r14+0xb],0x0
  3b:	41 80 46 0c 00       	add    BYTE PTR [r14+0xc],0x0
  40:	41 80 46 0d 00       	add    BYTE PTR [r14+0xd],0x0
  45:	41 80 46 0e 00       	add    BYTE PTR [r14+0xe],0x0
  4a:	41 80 46 0f 00       	add    BYTE PTR [r14+0xf],0x0

Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 9.2
- Reference cycles: 9.44
- UOPS_RETIRED.ALL: 16.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0
  27:	41 80 46 08 00       	add    BYTE PTR [r14+0x8],0x0
  2c:	41 80 46 09 00       	add    BYTE PTR [r14+0x9],0x0
  31:	41 80 46 0a 00       	add    BYTE PTR [r14+0xa],0x0
  36:	41 80 46 0b 00       	add    BYTE PTR [r14+0xb],0x0
  3b:	41 80 46 0c 00       	add    BYTE PTR [r14+0xc],0x0
  40:	41 80 46 0d 00       	add    BYTE PTR [r14+0xd],0x0
  45:	41 80 46 0e 00       	add    BYTE PTR [r14+0xe],0x0
  4a:	41 80 46 0f 00       	add    BYTE PTR [r14+0xf],0x0

Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 9.04
- Reference cycles: 9.28
- UOPS_RETIRED.ALL: 18.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	41 80 06 00          	add    BYTE PTR [r14],0x0
   4:	41 80 46 01 00       	add    BYTE PTR [r14+0x1],0x0
   9:	41 80 46 02 00       	add    BYTE PTR [r14+0x2],0x0
   e:	41 80 46 03 00       	add    BYTE PTR [r14+0x3],0x0
  13:	41 80 46 04 00       	add    BYTE PTR [r14+0x4],0x0
  18:	41 80 46 05 00       	add    BYTE PTR [r14+0x5],0x0
  1d:	41 80 46 06 00       	add    BYTE PTR [r14+0x6],0x0
  22:	41 80 46 07 00       	add    BYTE PTR [r14+0x7],0x0
  27:	41 80 46 08 00       	add    BYTE PTR [r14+0x8],0x0
  2c:	41 80 46 09 00       	add    BYTE PTR [r14+0x9],0x0
  31:	41 80 46 0a 00       	add    BYTE PTR [r14+0xa],0x0
  36:	41 80 46 0b 00       	add    BYTE PTR [r14+0xb],0x0
  3b:	41 80 46 0c 00       	add    BYTE PTR [r14+0xc],0x0
  40:	41 80 46 0d 00       	add    BYTE PTR [r14+0xd],0x0
  45:	41 80 46 0e 00       	add    BYTE PTR [r14+0xe],0x0
  4a:	41 80 46 0f 00       	add    BYTE PTR [r14+0xf],0x0

Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 11.53
- Reference cycles: 11.81
- UOPS_RETIRED.ALL: 16.2
- UOPS_MS: 0.0

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.0
- Core cycles: 14.46
- Reference cycles: 14.75
- UOPS_RETIRED.ALL: 1.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=10

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.2
- Core cycles: 3.99
- Reference cycles: 4.08
- UOPS_RETIRED.ALL: 1.2
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=100

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 1.02
- Core cycles: 7.59
- Reference cycles: 7.78
- UOPS_RETIRED.ALL: 1.02
- UOPS_MS: 0.0

With 4 independent instructions

With unroll_count=200 and no inner loop

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.0
- Core cycles: 37.93
- Reference cycles: 38.8
- UOPS_RETIRED.ALL: 4.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=2

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 5.0
- Core cycles: 4.04
- Reference cycles: 4.15
- UOPS_RETIRED.ALL: 5.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=20

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 4.1
- Core cycles: 7.07
- Reference cycles: 7.25
- UOPS_RETIRED.ALL: 4.1
- UOPS_MS: 0.0

With 8 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.0
- Core cycles: 42.27
- Reference cycles: 42.88
- UOPS_RETIRED.ALL: 8.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 10.0
- Core cycles: 8.09
- Reference cycles: 8.27
- UOPS_RETIRED.ALL: 10.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 8.2
- Core cycles: 8.46
- Reference cycles: 8.62
- UOPS_RETIRED.ALL: 8.2
- UOPS_MS: 0.0

With 16 independent instructions

With unroll_count=100 and no inner loop

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0
  2f:	43 80 44 2e 08 00    	add    BYTE PTR [r14+r13*1+0x8],0x0
  35:	43 80 44 2e 09 00    	add    BYTE PTR [r14+r13*1+0x9],0x0
  3b:	43 80 44 2e 0a 00    	add    BYTE PTR [r14+r13*1+0xa],0x0
  41:	43 80 44 2e 0b 00    	add    BYTE PTR [r14+r13*1+0xb],0x0
  47:	43 80 44 2e 0c 00    	add    BYTE PTR [r14+r13*1+0xc],0x0
  4d:	43 80 44 2e 0d 00    	add    BYTE PTR [r14+r13*1+0xd],0x0
  53:	43 80 44 2e 0e 00    	add    BYTE PTR [r14+r13*1+0xe],0x0
  59:	43 80 44 2e 0f 00    	add    BYTE PTR [r14+r13*1+0xf],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.0
- Core cycles: 50.38
- Reference cycles: 52.16
- UOPS_RETIRED.ALL: 16.0
- UOPS_MS: 0.0

With loop_count=1000 and unroll_count=1

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0
  2f:	43 80 44 2e 08 00    	add    BYTE PTR [r14+r13*1+0x8],0x0
  35:	43 80 44 2e 09 00    	add    BYTE PTR [r14+r13*1+0x9],0x0
  3b:	43 80 44 2e 0a 00    	add    BYTE PTR [r14+r13*1+0xa],0x0
  41:	43 80 44 2e 0b 00    	add    BYTE PTR [r14+r13*1+0xb],0x0
  47:	43 80 44 2e 0c 00    	add    BYTE PTR [r14+r13*1+0xc],0x0
  4d:	43 80 44 2e 0d 00    	add    BYTE PTR [r14+r13*1+0xd],0x0
  53:	43 80 44 2e 0e 00    	add    BYTE PTR [r14+r13*1+0xe],0x0
  59:	43 80 44 2e 0f 00    	add    BYTE PTR [r14+r13*1+0xf],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 18.0
- Core cycles: 36.75
- Reference cycles: 37.63
- UOPS_RETIRED.ALL: 18.0
- UOPS_MS: 0.0

With loop_count=100 and unroll_count=10

Code:

   0:	43 80 04 2e 00       	add    BYTE PTR [r14+r13*1],0x0
   5:	43 80 44 2e 01 00    	add    BYTE PTR [r14+r13*1+0x1],0x0
   b:	43 80 44 2e 02 00    	add    BYTE PTR [r14+r13*1+0x2],0x0
  11:	43 80 44 2e 03 00    	add    BYTE PTR [r14+r13*1+0x3],0x0
  17:	43 80 44 2e 04 00    	add    BYTE PTR [r14+r13*1+0x4],0x0
  1d:	43 80 44 2e 05 00    	add    BYTE PTR [r14+r13*1+0x5],0x0
  23:	43 80 44 2e 06 00    	add    BYTE PTR [r14+r13*1+0x6],0x0
  29:	43 80 44 2e 07 00    	add    BYTE PTR [r14+r13*1+0x7],0x0
  2f:	43 80 44 2e 08 00    	add    BYTE PTR [r14+r13*1+0x8],0x0
  35:	43 80 44 2e 09 00    	add    BYTE PTR [r14+r13*1+0x9],0x0
  3b:	43 80 44 2e 0a 00    	add    BYTE PTR [r14+r13*1+0xa],0x0
  41:	43 80 44 2e 0b 00    	add    BYTE PTR [r14+r13*1+0xb],0x0
  47:	43 80 44 2e 0c 00    	add    BYTE PTR [r14+r13*1+0xc],0x0
  4d:	43 80 44 2e 0d 00    	add    BYTE PTR [r14+r13*1+0xd],0x0
  53:	43 80 44 2e 0e 00    	add    BYTE PTR [r14+r13*1+0xe],0x0
  59:	43 80 44 2e 0f 00    	add    BYTE PTR [r14+r13*1+0xf],0x0

Init:
```
XOR R13, R13
```
Show nanoBench command
Results:
- Instructions retired: 16.2
- Core cycles: 41.84
- Reference cycles: 42.85
- UOPS_RETIRED.ALL: 16.2
- UOPS_MS: 0.0

ADD (M8, 0) - Throughput and Uops

With a non-indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With an indexed addressing mode

With 1 independent instruction

With unroll_count=500 and no inner loop

With loop_count=1000 and unroll_count=10

With loop_count=100 and unroll_count=100

With 4 independent instructions

With unroll_count=200 and no inner loop

With loop_count=1000 and unroll_count=2

With loop_count=100 and unroll_count=20

With 8 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10

With 16 independent instructions

With unroll_count=100 and no inner loop

With loop_count=1000 and unroll_count=1

With loop_count=100 and unroll_count=10